User Manual

Step 5. ( for the 552, 560 or 1090 )

Final Inspection

Inspect your equipment to ensure that all fasteners are tight and components are properly assembled.

Do not use or put the equipment into service until the equipment has been fully assembled and inspected for correct performance in

accordance with the User’s Guide. Fully tighten the hardware before you put the dumbbells into the installed dumbbell platforms or

bases on the stand.

To validate warranty support, keep the original proof of purchase and record the following information:

Serial Number ___________________________ Date of Purchase ____________________

To register your product warranty, go to: www.bowex.com/register or call 1 (800) 605–3369.

If you have questions or problems with your product, please call 1 (800) 605–3369, or go to: www.bowex.com.

Step 4. ( for the 552, 560 or 1090 )

Attach the Retaining Straps to the Stand and Fully Secure each Dumbbell Base