Use and Care Manual

If the Rollers seem to be “off” and not fully tracked on the Rail Assembly,

this procedure may assist.

1. Unplug the AC Power Adapter from the machine.

2.Usinga#2Phillipsscrewdriver,removethe1indicatedscrewfromthe

Rear Shroud.

3. Carefully remove the Rear Shroud from the machine. Place a standard

screwdriver behind and near the middle of the Rear Shroud and gently pry

until it just releases. Then move the screwdriver to the bottom and gently

pry until the Rear Shroud comes off.

4.RemovetheCapsfromthemachine.

Rail Assembly

Roller riding

slightly outward

or “off” of the Rail

Assembly

Cap

Rear Shroud