Use and Care Manual

37
Reset the Console on the
Bowflex
™
Max Trainer
™
M6/M8 and M6i/M8i
Skill Level: I
8022023.020119.A
Service Procedure
NOTICE: ThisdocumentprovidesinstructionstoresettheConsoletothemanufacturedsettingsontheBowex
™
Max Trainer
™
M6/M8 and M6i/M8i machines.
If you need assistance, please contact Customer Service (if purchased in US/Canada) or your local distributor (if purchased outside US/Canada). To nd your local
distributor, go to: www.nautilusinternational.com
Important Safety Instructions - Before servicing or using this equipment, obey the following warnings:
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and under-
stand all Warnings on this machine.
• Read and understand the Part Replacement Procedure before working on the machine. Failure to obey the instructions and safety warnings could cause
injury to the service technician or bystanders.
• Keep bystanders, children and pets away from the product being serviced at all times.
• Make sure that the repair is done in an appropriate work space away from foot traffic and exposure to bystanders.
• Disconnect all power and allow to sit for 5 minutes before you service this machine.
• Some components of the equipment can be heavy or awkward. Enlist the service of a second person when you do maintenance steps involving these
components. Do not try to do heavy or awkward steps on your own.
• If replacement parts are necessary, use only genuine Nautilus replacement parts and hardware. Failure to use genuine replacement parts can cause a
risk to users, keep the machine from operating correctly and will void the warranty.
• Be sure that all warning stickers and instructional placards applied to the product stay present and in good condition when doing maintenance or
replacing components. If at any time the Warning labels become loose, unreadable or dislodged, replace the labels. If purchased in US/Canada, contact
Customer Service for replacement labels. If purchased outside US/Canada, contact your local distributor for them.
• Do not try to change the design or functionality of the machine being serviced as this can adversely effect user safety and will void the warranty.
• Do not use the machine until all shrouds, instructions, warning labels and correct functionality have been verified and tested for correct performance.
™
™
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand all
Warnings on this machine.
Nautilus,Inc.,www.NautilusInc.com,5415CenterpointParkway,Groveport,OH43125U.S.A.-CustomerService:NorthAmerica(800)605-3369,[e-mail]|outsideU.S.www.nautilusinternational.com|Printedin
China | © 2019 Nautilus, Inc. | Bowflex, the B logo, and Max Trainer are trademarks owned or licensed by Nautilus, Inc., registered or otherwise protected by common law in the United States and other nations. |
ORIGINAL
DOCUMENT - ENGLISH VERSION ONLY
1. With the machine at the Power-Up Mode screen, push and hold down the Volume and PAUSE/STOP buttons for 3 seconds to go into the Con-
sole Setup Mode.
Note: Push PAUSE/STOP to exit the Console Setup Mode and return to the Power-Up Mode screen.
2. The Console display shows the TOTAL HOURS the machine has operated.
3. Push the ENTER/START button.
4. TheConsoledisplayshowstheFirmwareVersionprompt.
5. Push the ENTER/START button.
6. The Console display shows the BLE VERSION prompt.
7. Push the ENTER/START button.
8. The Console displays the DISCONNECT BLE prompt.
9. The Console displays the VIEW ERROR LOG NO option. This option is for Service Technicians use only.
10. Push the ENTER/START button.
11. The Console displays the RESET CONSOLE NO prompt.
12. Push the Increase button to select the RESET CONSOLE YES prompt.
NOTICE: WitharesetoftheConsole,allUserProlesettingsandpreviousWorkoutswillbeerasedfromtheConsole.Thisinformationisnot
retrievable after a reset.
13. Push ENTER/START button. The Console will reset to factory settings.
14. UnplugtheACAdapterfromthemachinewhentheConsoledisplaysthe“POWERCYCLENOW”prompt.