Use and Care Manual

1. Unplug the AC Adapter from the wall outlet and machine.

2. Using a 5mm hex wrench, remove the screws (indicated by ovals) from

the Console Assembly.

3. Carefully lift the Console Assembly and expose the Cable Connections.

Note: Do not crimp any of the Console Cables. This step may require two

people.

4.CarefullydisconnecttheCableswhilenotallowingthemtofallintothe

Console Mast.

Note: Do not crimp any of the Console Cables.

5. Installation is the reverse procedure. Be sure not to crimp the Cables.

Note: When attaching the Console Assembly, do not fully tighten the

hardware until all hardware has been hand tightened. Do not crimp any of

the Console Cables.

NOTICE: After correctly performing this procedure, there may be unused

hardware because of updates to the Console Assembly.

6. Final Inspection

Inspect your machine to ensure that all hardware is tight and components

are properly assembled.

Do not use until the machine has been fully assembled and

inspected for correct performance in accordance with the

Owner’s Manual.

Note: Your machine may not match the images provided exactly.

Console Assembly

This opening as been removed from

later Console Assemblies, and may

result in unused hardware.