Use and Care Manual

55
1. Unplug the AC Adapter from the wall outlet and machine.
2.Usinga#2Phillipsscrewdriver,removethe4screws(2indicatedon
one side) from the Upper Shroud and remove it.
3. Using a 5mm hex wrench, remove the indicated hardware from the Left
Upper Handlebar.
Note: Be aware that the Upper Handlebar must be supported when
removing the hardware.
4.RemovetheRightandLeftStabilizerShroudsfromthemachine.
Right Stabilizer
Shroud
Left Stabilizer
Shroud
Upper Shroud