Use and Care Manual

20.Usinga9/16”or14mmsocketandwrench,removethenut

from the Left Crank Assembly.

21. Adjust the Crank Puller until the end of the Bolt is inside the

Nut (as shown).

22. Carefully thread the Crank Puller into the Left Crank Arm.

Be sure the Crank Puller has at least three rounds of threads

inserted.

23. Using a 16mm wrench, turn the inner portion (the Bolt) of the

Crank Puller clockwise. The Left Crank Arm will slide off as it is

tightened.

Note: Be aware that the Left Crank Arm will be loose and will

need to be supported.

24.RemovetheCrankPullerfromtheLeftCrankArm.

Bolt

Nut

Left Crank Assembly