Use and Care Manual

Fan Assembly

Screws

5.Usinga#2Phillipsscrewdriver,removetheindicated(byoval)screwand

only loosen the lowest indicated screw (arrow) from the Left Fan Cover.

6. The Left Fan Cover Assembly has a tab that needs to be pushed upward to

clear the loosened screw. While pushing up on the tab, remove the Left Fan

Cover Assembly.

7. Remove the Left Fan Cover Assembly from the machine. Be sure to note

how the fan screens are set into the Left Fan Cover to assist with the replace-

ment procedure.

8.RemovetheConefromtheFanAssembly.Thereare4clipsthatattachthe

Cone that can be accessed behind the Fan Assembly. Using a small standard

screwdriver, gently release the clips.

9.Usinga5mmhexwrench,removethe4screwsfromtheFanAssembly.Be

sure to support the Fan Assembly when removing hardware.

10. Installation is the reverse procedure.

11. Final Inspection

Inspect your machine to ensure that all hardware is tight and components are

properly assembled.

Do not use until the machine has been fully assembled and

inspected for correct performance in accordance with the

Owner’s Manual.

Cone

Fan Assembly