Use and Care Manual

71
Note: Your machine may not match the images provided exactly.
1. Unplug the AC Adapter from the wall outlet and machine.
2. Using a 5mm hex wrench, remove the indicated hardware from the
Right Upper Handlebar.
Note: Be aware that the Right Upper Handlebar must be supported when
removing the hardware.
3.Usinga#2Phillipsscrewdriver,removethe4screws(2indicatedon
one side) from the Upper Shroud.
4.RemovetheRightandLeftStabilizerShroudsfromthemachine(if
equipped).
Right Upper
Handlebar
Right Stabilizer
Shroud
Left Stabilizer
Shroud
Upper Shroud