Use and Care Manual

78
1. Unplug the AC Adapter from the wall outlet and machine.
2.Usinga#2Phillipsscrewdriver,removethe4screws(2indicatedon
one side) from the Upper Shroud.
3. Remove the Right and Left Stabilizer Shrouds from the machine.
4.Usinga5mmhexwrench,removetheindicatedhardwarefromthe
Right Upper Handlebar.
Note: Be aware that the Right Upper Handlebar must be supported when
removing the hardware.
Right Stabilizer
Shroud
Left Stabilizer
Shroud
Upper Shroud
Right Upper
Handlebar