Use and Care Manual

2. Remove the Right Stabilizer Shroud from the machine (if equipped).

3.Usinga#2Phillipsscrewdriver,removetheindicated(byovals)screws

and only loosen the lowest indicated screw (arrow) from the Right Fan

Cover.

Note: Loosen the lowest screw by at least 3 full rotations.

To assist with assembly, note that the upper screw is a machine

screw and not a self-tapping screw.

4.TheRightFanCoverhasatabthatneedstobepushedupwardtoclear

the loosened screw. While pushing up on the tab, remove the Right Fan

Cover from the assembly.

Note: The Power Cable is attached to the inside of the Right Fan Cover.

Be sure not to crimp the cable by placing the Right Fan Cover close to the

front of the machine.

1. Unplug the AC Adapter from the wall outlet and machine.

Power Cable

Note: Your machine may not match the images provided exactly.

Right Stabilizer

Shroud

Power Inlet