Owner manual

A-11

Assembly Guide

Step 13 - Assemble the Leg Extension Seat

Locate the following items:

• Item #19 - Leg Extension Seat Pad

• Item #21 - Leg Extension Seat Support Tube

• Item #C - (4) 5/16" X 3/4" Button Head Screws

• Item #M - (4) 5/16" Washers

Place the Leg Extension Seat Pad (Item #19) cushion-side

down. Align the holes in the Leg Extension Seat Support Tube

(Item #21) with the holes on the underside of the Seat Pad.

Place (4) 5/16" Washers (Item #M) over (4) 5/16" X 3/4" Button

Head Screws (Item #C) - one over each screw. Insert the

screws through the aligned holes, and tighten.

Completely tighten hardware installed during

Step 13.

Figure 13

Rail

Bracket

Seat

Curved

Edge