Owner manual

15
Using Calipers When Measuring Skinfolds
The procedure for measuring skinfold thickness is to grasp firmly with the thumb and forefinger a fold of skin and
surface fat and pull it away from the underlying muscle. Take the caliper in your other hand and open the jaws.
Clamp the jaws over the pinched skin and fat. The jaws exert constant tension at the point of contact with the
skin. The thickness of the double layer of skin and fat can then be read directly from the caliper, which is marked
in millimeters.
Use these figures on the following chart to
determine your body-fat percentage and enter the
number on the line below.
Starting body-fat percentage
Women
Suprailium
Triceps
Thigh
Total
Men
Chest
Abdomen
Thigh
Total
Measurements
Optional Picture Taking
Pictures can be the most exciting evaluation you can
do. The numbers and the tape measurements are
great, but actually seeing differences from comparison
photographs of yourself is quite satisfying.
Taking full-length photographs is not difficult, but to see
the maximum difference between before and after, you
should follow these guidelines.
1) Keep everything the same. Wear the same outfit, a
snug solid color is best, and have the person taking
the picture stand in the same place, with the same
setting behind you.
2) Make sure you stand against an uncluttered, light
background.
3) Have the person taking the photograph move away
from you until he can see your entire body in the
viewfinder.
4) Stand relaxed for three pictures, front, right side, and
back. Do not try to suck in your stomach.
5) Interlace your fingers and place them on top of your
head, so the contours of your torso will be plainly
visible. Keep your feet 8” (20 cm) apart in all three
pictures.
6) When you get the film developed tell the processors
to make your after photos the same size as your
previous ones. This way, your height in both sets
of photos is equal and more valid comparisons can
be made.