Owner`s manual

7
Emergency Stop Procedure ( Safety Key Port )
The TreadClimber
®
machine is equipped with a Safety Key
that can prevent serious injury, as well as prevent children
from playing with and/or being injured on the machine. If
the Safety Key is not correctly inserted into the Safety Key
Port, the belts will not operate.
!
Always attach the Safety Key Clip to your clothing
during your workout.
When you use the machine, only remove the Safety
Key in an emergency. When the key is removed while
the machine is in operation, it will stop quickly,
which could cause the loss of balance and possible injury.
For safe storage of the machine and to prevent unsupervised operation of the machine always remove the
Safety Key and disconnect the power cord from the wall outlet and machine AC input. Place the power cord in a
secure location.
The Console will display “EStP” for a Safety Key fault. The TreadClimber
®
machine will pause a workout when the
Safety Key is removed. Inspect the Safety Key and be sure it is connected to the Console correctly. Push the
START button to resume the workout.
Safety Warning Labels and Serial Number