Instruction Manual

Revised Assembly Steps 1 and 7 for the
Bowfl ex
™
Treadmill 10 / Treadmill 22 / Treadmill 25 / Treadmill 56
Addendum
This addendum provides instructions to properly attach the Uprights and Outer Junction Covers to the Bowfl ex
™
Treadmill 10 / Treadmill 22 / Treadmill 25 / Treadmill 56.
If you need assistance, please contact Customer Service (if purchased in US/Canada) or your local distributor (if purchased outside US/Canada). To fi nd your local
distributor, go to: www.nautilusinternational.com
Refer to the Assembly Manual for complete safety instructions.
8028033.111520.A
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand
all Warnings on this machine.
™
™
Nautilus, Inc., www.NautilusInc.com, 5415 Centerpoint Parkway, Groveport, OH 43125 U.S.A. - Customer Service: North America [phone], [e-mail] | outside U.S. www.nautilusinternational.com | Printed in
China | © 2020 Nautilus, Inc. | Bowfl ex and the B logo are trademarks owned or licensed by Nautilus, Inc., registered or otherwise protected by common law in the United States and other nations. |
ORIGINAL DOCUMENT
- ENGLISH VERSION ONLY
Assembly Step 1. Attach the Uprights to the Base Assembly, and then Connect the Cables from the Base Assembly to the
Right Upright
Note: Do not crimp cables. Do not fully tighten Hardware until instructed.
A
B
C
X6