User manual

24Bit/192kHz playback with Windows® operating systems

* For Windows

operating systems a 24Bit/192kHzUSB driver (supplied on CD) has to be installed. Insert the

included CD into the drive of your PC and follow the instructions.

After installing the driver, some settings have to be checked/done.

For example - Windows 7

operating system:

 Control Panel  Hardware and Sound Sound Playback:

select Speaker/MaiA DS2 USB 2.0 Audio Out

 Properties  Supported formats: make sure nothing is assigned

 Level  Sound: setting must be 100

 Enhancements: disable all enhancements  Advanced  Default Format: set to studio quality 24/192

DSD playback

Playback of DSD files (.dff, .dsf) is possible over USB. Player capable of playing DSD files is required in your

computer. Setup guide is available on our website http://www.box-designs.com

On the front panel are LED´s which indicate sample rate of DSD playback.

Remote control

turns the unit on or back into standby

and adjust the sound volume

- and select the inputs

Blank button confirms Bluetooth pairing

Activate/deactivate mute

Front panel controls

ON/OFF

VOL