User manual

A new connection is only possible if the Pair LED is off (it indicates that no device is connected). If a

problem with Bluetooth connection occurs, it is necessary to reset memory and to delete all paired

devices. For reset turn off the unit > disconnect power supply > press & hold power button >

connect power supply > still hold power button for another 5 seconds > release power button. The

blue LED above the power button will blink for few seconds. When the LED stops blinking, memory is

erased and you can turn on the unit.

Bluetooth remote control function

IR emitting diodes are located on the front panel of the product. Free view has to be ensured for reliable use

of remote control function.

-Bluetooth connection must be established prior using MaiA DS2 remote control function over Box

control app.

-Only one MaiA DS2 can be in the list of paired devices

-Bluetooth remote control function is available in Box control app version 1.5 and higher.

- Connect your device to MaiA DS2 over Bluetooth

- Run Box Control app

-After first start is automatically opened Setup wizard, in the first step (Select your Devices) select MaiA DS2

remote and confirm with "Next" and in second step check all the remotes you want to use and confirm your

entry with "Next".

Once remotes are confirmed, you can use your Android device for IR control of the selected products.