User manual

Replacing batteries

Proceed as follows:

• Unlock and slide open the battery case cover

• Replace the battery.

Make sure the battery is the right way round !

• Close the battery case cover

Battery type: 1 x CR2032 / 3V or 1 x CR2025 / 3V

Do not dispose the batteries as ordinary domestic refuse. Please dispose your exhausted batteries at

the appropriate collection sites - usually located at supermarkets and drugstores.

Technical specifications Pro-Ject MaiA DS2

Frequency response: 20Hz - 45kHz (max. deviation -0,1dB +0,2dB)

Power Output @ THD+N=1%: 2 x 135W/4 ohms and 2 x 78W/8 ohms

Channel separation: > 70dB at 10kHz

Noise floor: > -85dB (20Hz – 20kHz)

THD+N: < 0,08% @ 3W

Gain: 28 dB (measured via line level input), + 6 dB

Line level inputs: 3 pairs RCA cinch connectors

Line input sensitivity: 1V (78W/8 Ohms)

Line input sensitivity + 6 dB: 500mV (78W/8 Ohms)

Line input impedance: 50kohms

Phono input: 1 pair RCA

Phono input sensitivity: suitable for MM, MI and MC cartridges

Phono input impedance: MM 47k ohms / MC 100 ohms