AutoShred® Microcut Shredder User Manual
Contents Technical Specifications & Features................................................................ 3 Warnings.......................................................................................................... 4 Installation / Safety Instructions...................................................................... 5 Assembly......................................................................................................... 6 Operation....................................................
1 year Limited Product Warranty Auto Feeding Tray Safety Cover Reverse/Off/ On/Forward slide switch Manual Feed Entry Reverse Button Power Off Power On Forward Button Credit Card Power Bin Full Overheat Casters Technical Specifications Cutting Type............................................................................................Micro Cut Shred Size..................................................................... 0.16 x 0.39 in. (4 x 10mm) Will Shred................................
! ! WARNINGS CAUTION: KEEP THIS DEVICE AWAY FROM CHILDREN AND PETS! Place the paper shredder in an area less accessible to children. DO NOT PLACE FINGERS TOO CLOSE TO THE FEED SLOT AS SERIOUS INJURY MAY OCCUR. Paper shredders can pull children’s fingers into the shredder mechanism. AVOID GETTING LOOSE CLOTHING OR JEWELRY NEAR THE FEED SLOT. AVOID GETTING HAIR NEAR THE FEED SLOT. NEVER spray any aerosol-based products in or around the shredder.
Installation • Only operate this product from the type of power source indicated on the marking label. If you are not sure of the type of power available, consult an electrician. • Make sure the electrical outlet is easily accessible from the shredder. • Shredder must be operated only in upright position. • To make sure the shredder has proper ventilation, place it a minimum distance of 2 in. (5 cm) from the wall or furniture. Safety Instructions 1. Read and follow all instructions before use.
Assembly NOTE: This shredder will operate only when used with the supplied basket. The supplied basket has a built-in safety feature which prevents the shredder from operating if used with any other basket or if improperly assembled. This shredder contains sharp edges on the underside of the shredder head. The plug on the power supply cord is intended to serve as the disconnect device, so the socket-outlet should be installed near the equipment and should be easily accessible.
Operation (cont’d) Manual Feed (see page 3): 1. To shred paper, insert straight into the manual feed entry. 2. To shred credit cards, insert 1 card at a time into the middle of the manual feed entry. Auto Feed (see page 3): 1. Open the auto feed tray. 2. Insert paper into the auto feed tray. Once you insert papers into the auto feed tray, it will start shredding each sheet automatically. Please Note: - Only paper should be used in the auto feed tray.
Operation (cont’d) BIN FULL: The Yellow Bin Full LED indicator will illuminate when waste bin is full. 1. Turn the unit OFF by sliding to the Power Off position. 2. Remove the bin and either dispose of the paper shreds or compress the shreds down. 3. Re-insert the bin into the housing. NOTE: the Yellow Bin Full LED indicator will be illuminated and the unit will not power on until the bin is properly inserted. 4. Slide the power switch to Auto On to resume normal operation.
Troubleshooting If you have a problem with your shredder, check the issues and resolutions below. If you cannot solve the problem, contact our product support experts at 1-866-707-1854. Do not open the shredder head to attempt repair. It could expose you to electric shock and sharp blades. Doing this will void your warranty. ISSUE RESOLUTIONS Shredder will not turn on. a. Make sure the shredder is plugged in. b. Make sure the slide switch is in the Power On position. c.
One Year Limited Warranty / Product Registration The manufacturer warrants the machine for a period of one year to be free from defects in material and workmanship; this warranty does NOT cover normal wear and tear. If any part is found to be defective during the warranty period, your sole and exclusive remedy will be repair or replacement, at the manufacturer’s option and expense, of the defective part except for the shipping cost.
Déchiqueteuse à microcoupur d’une capacité de AutoShred MD Manuel de l’utilisateur
Table des matières Caractéristiques techniques.......................................................................... 15 Mises en garde.............................................................................................. 16 Directive d’installation et consignes de sécurité........................................... 17 Assemblage................................................................................................... 18 Fonctionnement.....................................................
Garantie limitée d’un 1 an sur le produit Interrupteur à glissière des modes Reverse (Marche Bac d’alimentation automatique arrière) / Off (Arrêt) / On (Marche) / Forward (Marche avant) Couvercle de sûreté Fente d’alimentation manuelle Bouton Reverse (marche arrière) Bouton Bouton Bouton de Off On Forward (Arrêt) (Marche) (marche avant) Carte de crédit Power (Démarrage) Corbeille pleine Surchauffe Galets Marinoni Caractéristiques techniques Type de coupe............................................
! MISES EN GARDE ! AVERTISSEMENT : GARDER CET APPAREIL HORS DE LA PORTÉE DES ENFANTS ET DES ANIMAUX DE COMPAGNIE! Installez la déchiqueteuse à papier dans un endroit moins accessible pour les enfants. NE PAS METTRE SES DOIGTS TROP PRÈS DE LA FENTE D’INSERTION DU PAPIER, CAR CELA POURRAIT ENTRAÎNER DES BLESSURES GRAVES.
Instructions d’installation • Ne faites fonctionner cet appareil qu’à partir de la source d’électricité indiquée sur l’étiquette. Si vous n’êtes pas certain du type d’alimentation électrique disponible, veuillez consulter un électricien. • Assurez-vous que la sortie électrique soit aisément accessible depuis la déchiqueteuse. • La déchiqueteuse ne doit être utilisée qu’en position verticale.
Assemblage NOTE : Cette déchiqueteuse ne fonctionnera que si elle est utilisée avec la corbeille fournie. Cette corbeille possède un dispositif de sécurité intégré qui empêche la déchiqueteuse de fonctionner quand elle est utilisée avec une autre corbeille ou quand la corbeille n’est pas assemblée correctement. Cette déchiqueteuse contient des arêtes coupantes sur la face inférieure de son couvercle.
Fonctionnement (suite) Alimentation manuelle (voir page 15) : 1. Pour déchiqueter du papier, insérez droite dans la fente d’insertion manuelle. 2. Pour déchiqueter des cartes de crédit, insérez 1 carte de crédit à la fois au milieu de la fente d’insertion. Alimentation automatique (voir page 15) : 1. Ouvrez le bac d’alimentation automatique. 2. Insérez papier dans le bac d’alimentation automatique; l’appareil commencera automatiquement à déchiqueter le papier.
Fonctionnement (suite) CORBEILLE PLEINE : Le voyant DEL jaune Corbeille pleine s’allume quand la corbeille est pleine. 1. Éteignez l’appareil en glissant l’interrupteur à la position Power Off. 2. Retirez la corbeille et jetez ou compactez les résidus de papier. 3. Remettez la corbeille dans son logement (boîtier). NOTE : le voyant DEL jaune Corbeille pleine sera allumé et l’appareil ne se remettra pas en marche tant que la corbeille ne sera pas remise en place correctement. 4.
Résolution de problèmes Si vous éprouvez un problème avec votre déchiqueteuse, veuillez consulter la section de problèmes et de solutions ci-dessous. Si vous ne pouvez pas résoudre votre problème, veuillez communiquer avec nos spécialistes du soutien technique en composant le 1-866-707-1854. N’ouvrez pas la tête de la déchiqueteuse pour essayer de la réparer vous-même. Vous risqueriez de subir une décharge électrique et de vous couper sur les lames tranchantes de la déchiqueteuse.
Garantie limitée de un ans / Enregistrement du produit Le fabricant garantit pour une période de un ans que l’appareil est exempt de tout défaut de matériel ou de main-d’œuvre. Cette garantie NE couvre PAS l’usure normale. Si toute pièce est défectueuse au cours de la période couverte par la garantie, votre seul et unique recours consiste à la faire réparer ou remplacer, au choix et aux frais du fabricant, à l’exception du coût d’expédition.
Notre engagement visant à révolutionner la productivité dans notre domaine d’expertise vous aidera à devenir un expert dans le vôtre.