Specifications

Chapter 3 – Operation
15
OPERATION
Input
Press the input button on the control panel to switch between the inputs. On the
remote control, press the number corresponding to the source mode you want:
– Input 1 – computer or DVI Mode
– Input 2 & 3 – component video 1&2
– Input 4 – S-Video/Composite Video
A screen at the bottom of the image shows which mode is currently selected. See
“Input Signals” on page 19 for more information.
Menu
Press this button to open the OSD menus. Refer to Chapter 4 for a full description of
the OSD menu functions.
Color Temperature
Press this button to set the color temperature of the image. See “Color Temp” on
page 20 for more information.
Gamma
Press the Gamma button on the remote control to adjust the gamma correction. See
“Gamma Correction” on page 21 for more information.
Downloaded From projector-manual.com Boxlight Manuals