Owner`s manual

15
Setting Up
How To Connect
Laptop or desktop computer
Connect the audio cable if necessary
1. If you connect end of the computer cable to the projector’s RGB IN. Please
connect one other end of the audio cable to the AUDIO IN 1.
2. If you connect the DVI cable to the projector’s DVI-I IN. Please connect one
other end of the audio cable to the AUDIO IN 2.
3. If you connect the S-Video/ Video/ Y,Pb,Pr port of the projector. Please connect
the other end of the audio cable to the AUDIO IN 3 jack on the computer
Connect USB Mouse
USB mouse compatible MS-Window98/ 2000/ NT/ XP/ Me, Macintosh :
OS8.6~10.1, and a Microsoft Mouse driver installed.
1. Insert the end of the USB Cable (B-Type) to the projector’s USB port.
2. Connect the end of the USB Cable (A-type) to the computer’s USB port.
3. When the projector and computer are turned on, the appropriate drivers should
load automatically.
If the selected video image is not displayed after the projector is turned on and
the correct video source has been selected, please check that the video source
device is turned on and operating correctly. Also check that the signal cables
have been connected correctly.
Many laptops do not turn on their external video ports when connected
to a projector. Usually a key combination like Fn + F3 or CRT/LCD key
turns the external display on / off. Locate a function key labeled CRT/LCD
or a function key with a monitor symbol on the laptop. Press Fn and the
labeledfunction key simultaneously. Refer to your laptop’s documentation to
discover your laptop’s key combination.
Downloaded From projector-manual.com Boxlight Manuals