User Manual ProjectoWrite5 151 NE State Hwy 300, Ste A Belfair, WA 98528 360.464.2119 www.boxlight.
Projector About the Owner’s Manual Please read the owner‟s manual thoroughly to ensure correct use of the projector and its features. After reading, store the owner‟s manual in a safe place for future reference. Features 1. Designed for tough environments 2. Side changing lamp 3. Side changing filter 4. Quick off 5. Advanced anti-theft features 6. Five auto features (Auto Search, Auto Sync, Auto Ceiling, Auto Keystone and Auto Filter Alert) 7.
Contents About The Owner’s Manual Contents.........................................................................................................................................................1 Contents of Your Box...................................................................................................................................3 Safety Instructions........................................................................................................................................
Contents MENU (PC Mode)....................................................................................................................................59 Picture Menu (PC Mode)..........................................................................................................................59 Audio Menu (PC Mode)............................................................................................................................60 Setting Menu (PC Mode)......................................
CaofneteynItnssotrf uYcotuiornBsox S Check-list of your accessories Please make sure that the following items are included in the box. If any items are missing, contact your dealer. 1. Projector 2. Quick Start Guide 3. Owner’s Manual CD 5. Power Cord 6. Computer Cable 3 4.
Safety Instructions The projector is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that you follow the instructions mentioned in this manual and marked on the product. WARNING / CAUTION 4. While connecting, make sure that the shape of the cable‟s connector fits the port to connect with. Be sure to tighten the screws on connectors with screws. 1.
Safety Labels WARNING Do not look through the lens when the lamp is on. Never look through the lens when the lamp is on. The powerful light could adversely affect vision. Use special caution in households where children are present. Avoid shock or impact on the projector. If the projector should fall, resulting in damage to the cabinet, immediately turn off the power switch, disconnect the power plug from the power outlet and contact your dealer. Continued use could result in fire or electrical shock.
Safety Labels Safety labels are used on or within the projector to alert you to items or areas requiring your attention.
Part Names Projector 1 Control panel 1 Operating system. 12 Lens cover Attach when not using to protect the lens from becoming dirty or damaged. 3 Filter cover Prevents dust and other foreign particles from being drawn into projector. Remove the filter cover to clean the air filter. Front IR receiver 3 7 2 14 Focus ring Use the focus ring to focus the projector image. 8 Rotate the focus ring until the image is clear. 15 Zoom ring 5 Use the zoom ring to adjust the size of the projected image.
Part Names Control Panel 9 10 LAMP INDICATOR 10 11 12 13 14 15 16 9 KEYSTONE POWER INDICATOR 14 1 AUTO Adjust the vertical keystone with menu-up, menu-down. Automatically adjust the setting to match the current input. 10 1 VOLUME + / - 15 1 Increase or decrease sound. (POWER) Power On / Off. 11 INPUT Select input source: RGB 1 RGB 2 S-Video Video Note : 17 16 1 LAMP INDICATOR Indicates a status in the internal projector temperature, lamp door properly closed or cooling down.
Part Names Rear A B Q C D E P O N A REAR IR RECEIVER B USB Port (USB-B Type) F G H I J K L M I LAN Please see page76 Network Control Application for details. Connect a USB cable to a computer to control computer Interactive functions. J S-VIDEO C RS-232C Input the S-Video signal from a video source. Serial data port for controlling the projector with a computer or other RS-232 control device. K AUDIO IN 3, R / L D AUDIO IN 1 & P AUDIO IN 2 RCA type corresponds to video input.
Setting Up Arrangement 1. Before installation, make sure that the projector is turned off and the power cord is disconnected. 2. Do not set up and move the projector, while it is hot. 3. The distance between the projector and screen determines the actual image size. Refer to the table below to determine the screen size at a given distance. Note: The dimensions in the table below are approximate. 16:9 Screen size (diagonal) Distance (m) Distance (feet) inch m Tele Wide Tele Wide 40 1.0 1.36 1.
Setting Up Arrangement 1. Before installation, make sure that the projector is turned off and the power cord is disconnected. 2. Do not set up and move the projector, while it is hot. 3. The distance between the projector and screen determines the actual image size. Refer to the table below to determine the screen size at a given distance. Note: The dimensions in the table below are approximate. 16:10 Screen size (diagonal)) Distance (m) Distance (feet) inch 40 m 1.0 Tele 1.46 Wide 1.18 Tele 4.
Setting Up Power ON / OFF POWER indicator Outlet AC inlet Zoom ring Turning on the power 1. Make sure that power cord is firmly and correctly connected to the projector. 2. Remove the lens cover, and the POWER indicator will light up in green. 3. Press POWER button on the control panel or the remote control to turn on the projector. 4. Rotate the zoom ring to adjust the screen size. 5. Rotate the focus ring to adjust the focus.
Setting Up Setting Up The Projector The projector supports the following four different projection methods. 1. Front projection 3. Rear ceiling projection 2. Rear projection 4. Front ceiling Projection Special installation is required in order to suspend the projector from the ceiling. Please ask your dealer for details.
Setting Up Ceiling Mounted Installation Guide Attach ceiling mount at four-suspension bracket fixing points when suspending from a ceiling. Special installation is required in order to suspend the projector from the ceiling. Please ask your dealer for detals. MAX M4x8 mm For Mounting. Security Anchor The product is equipped with security anchor and PIN LOCK functions to help prevent unauthorized removal projector.
Setting Up Adjusting The Projector’s Elevation Use the adjustable foot at the front of the projector to set the image height. 1 Holding the projector, push the foot adjust buttons to loosen the front adjustable foot. CAUTION 12 Position the front side of the projector to the desired height. 3 Release the foot adjust buttons in order to lock the front adjustable feet. 14 After making sure that the front adjustable feet are locked, put the projector gently atop.
Setting Up How To Connect Laptop or desktop computer Video recorder DVD Player, etc. S-VIDEO Output RS-232C termi nal AUDI O Input W hite(L)/Red(R) RGB Output AUDI O Out put W hite(L)/Red(R) HDMI RGB Output/Input VIDEO Output AUDI O Out put W hite(L)/Red(R) Video recorder, etc. Audio amplifier, etc. Before starting, make sure that the projector and computer are both turned off. Connect the computer Connect the computer cable from the computer to the projector's RGB IN.
Setting Up ●If the selected video image is not displayed after the projector is turned on and the correct video source has been selected, please check that the video source device is turned on and operating correctly. Also check that the signal cables have been connected correctly. ●Many laptops do not turn on their external video ports when connected to a projector. Usually a key combination like Fn + F3 or CRT/LCD key turns the external display on / off.
Remote Control Remote Control Battery Installation 1. Remove the battery cover. 2. Load the batteries. Make sure the poles are correctly oriented. 3. Close the battery cover. Caution ● Avoid excessive heat and humidity. ● Do not drop the remote control. ● If the remote control will not be used for an extended period, remove the batteries. ● Do not expose the remote control to water or moisture. This could result in malfunction.
Remote Control POWER Quick Key Power on / operation mode, Standby mode, Cool down mode. If it is not in the On-Screen Display main menu, you could press the INPUT button as the quick key. Select input source : RGB 1 RGB 2 S-Video Video Press HDMI USB to select the item. V keystone Volume MENU Display or hide the On-Screen Display main menu page. Press Press or Display menu item. or to select On-Screen Press or to select and adjust the function of On-Screen Display menu item or value.
E MZESNuUite(PC Mode) Main Menu Layout & Function Definition Main-items Function Definition EZ Suite Internal Memory EZ Media Function USB Sub-Function Definition Photo Video Audio Office viewer Photo Video Audio Office viewer Support Internal memory, USB compatible hard disks, Support Photo, Video, Audio Music and office viewer.
EZ Suite (EZ Media Function) Before to use: 1. Use the , , or buttons on the remote control to select an item. 2. Use the ENTER button on the remote control to enter item. 3. Use the ESC button on the remote control to exit items. 1. EZ Media Function: Layout & Behavior Support internal memory and USB-disk device (Support Photo, Video, Music, Office Viewer) Internal Memory EZ Media Function USB Photo Video Audio Office Viewer ►Note: 1.
EZ Suite (EZ Media Function) 1.1 Photo Function It will show the file name / thumbnails display / file number progress bar 1. From the Photo layout. Press the , , or buttons on the remote control to select the file. 2. While the highlighted photo file is selected, press the ENTER button on the remote control, the screen will display the selected file, and it will enter the Browse mode. 3.
(= 6XLWH (= 0HGLD Function) Photo navigator toolbar : Rotation Zoom in Previous Next Slide how On/Off Delete Copy Info Quit Press the , buttons on the remote control, to highlight control icon and press the ENTER button on the remote control to select. Rotation: To rotate an image. Using the or buttons on the remote control to rotate the image. It will resume the image when you press the ESC button on the remote control to exit shown image. Zoom in: To magnify a photo.
E= 6XLWH (= 0HGLD Function) 1.2 Video Function It will show the file name/ file list /file size/ file number progress bar 1. From the Video layout. Press the or buttons on the remote control, to highlight the file of video playlist and press the ENTER button on the remote control to display. 2. Press the ENTER button and a pop-up video navigator toolbar will display when the video is played.
(= 6XLWH (= 0HGLD Function) ► While video navigator toolbar is hidden, press the or on the remote control to play previous/next video file. ►Note: 1. Supports MPEG1/2/4, H264, WMV, RMVB video format, up to 1080P(20Mbps) resolution. Please refer to the multimedia support list document. 2. Support files sorting by file name 3. Video play: Support original size and full screen size display ►For more information, please check the page 47 for Video Setting. 1.
E= 6XLWH (= 0HGLD Function) 1. From the Audio layout. Press the or buttons on the remote control to highlight the file of audio playlist and press ENTER button to perform. Audio navigator toolbar: Previous Play fast Pause backward Play Play fast forward Next Repeat mode Previous: Play previous audio music file by pressing the button twice. Play fast backward: Play fast backward by pressing the button. Pause / Play: Pause or play the video by pressing the ENTER button.
(= 6XLWH (= 0HGLD )XQFWLRQ Sound Spectrum Show the total time and indicate current playing time ►Note: 1. Supports mp3, wma, ogg, and wav audio file format. 2. Supports file sorting by file name and modification date same as photo function. *For more information, please check the page48 for Audio Setting. 1.4 Office Viewer Function 1. Select and enter a document file that you want to browse. It will show the translucent operating menu around 5 seconds on the screen. 2.
(= 6XLWH (= 0HGLD )XQFWLRQ Operation info: ◄► Zoom In / Zoom out ▲▼Page up/Page down Rotate Crops the image, and magnifies or reduces the result of the cropping. These two buttons are used to go to the previous page or the next page in documents. Press “Enter” button for movement of document around a center of rotation. Exit Press “ESC” button to exit browse document. ►Note: 1. Embedded Picsel Office Viewer 2.
(= 6XLWH (= 'LVSOD\ )XQFWLRQ 2. EZ Display Function: Layout & Behavior Support USB Display, WiFi Display, LAN Display.
(= 6XLWH (= 'LVSOD\ )XQFWLRQ 2.1 EZ USB ►Note: EZ USB support MS Windows OS, Apple Mac OS 1. Select the EZ USB item at EZ Display interface. It will show the Ready for display image on the screen.
(= 6XLWH (= 'LVSOD\ )XQFWLRQ 2. Connect the computer's USB port to the projector's USB (mini-USB) port via the USB A to USB mini-B type USB Cable. 3. Computer‟s system will examines newly discovered removable media and devices if you connect to projector via USB cable. 4. Click and execute “Detection.exe” program to run the USB Display adapter for projecting the images from a computer‟s screen. Removing USB devices: 1. Press ESC button on the remote control to exit the USB Display adapter process. 2.
(= 6XLWH (= 'LVSOD\ )XQFWLRQ Running under WiFi AP Mode: Projector Ready: 1. Connect an optional Wireless USB WiFi Dongle unit to the projector‟s USB Port (USB -A). 2. Set the AP mode parameters at \..\settings\WiFi\AP mode\. *See „WiFi settings‟ (page 49) for more information.
EZ Suite(EZ Display Function) 3. Select the EZ WiFi item at EZ Display interface on the screen. It will show the Ready for display image on the screen. The 4-character pass code w i l l b e on the screen.
(= 6XLWH (= 'LVSOD\ )XQFWLRQ Computer Ready: 1. For first time use, please install PC/Mac-tool (EZ WiFi/LAN.exe) program. After installed, new USB device “EZ USB” and new adapter “EZ Display” (Virtual .Graphics Card) will be installed. ►You can download the PC/Mac-tool (EZ WiFi/LAN.exe) through the intranet by web browser. Please check "Download Tool" on Page 78 for more information. 2.
EZ Suite (EZ Display FXQction) 35
(= 6XLWH (= 'LVSOD\ )XQFWLRQ Mirror mode (default): Clone or mirror desktop mode Mirror mode Extension mode: Span or extended desktop mode About: The information of EZ WiFi/LAN Exit: To quit the program and discontinue projecting images from the computer. Audio Streaming: On -Projecting images from the computer with audio sound. Off -Projecting images from the computer without audio sound. ►Note: The frame rate of video would be decreased while the setting of Audio Streaming is ON.
(= 6XLWH (= 'LVSOD\ )XQFWLRQ Running under WiFi Client Mode: Projector Ready: 1. Connect an optional Wireless USB WiFi Dongle unit to the projector‟s USB Port (USB -A). 2. Set the Client mode parameters at \..\settings\WiFi\Client mode\. *See „WiFi settings‟ (page 52) for more information. 3. Use remove control to select the WiFi Display item at EZ Display interface on the screen. It will show the Ready for display image on the screen. You can also find the 4-character pass code on the screen.
(= 6XLWH (= 'LVSOD\ )XQFWLRQ Computer Ready: 1. We need to install PC/Mac-tool (EZ WiFi/LAN.exe) program. After installed, new USB device “EZ USB” and new adapter “EZ Display” (Virtual .Graphics Card) will be installed. ►You can download the PC/Mac-tool (EZ WiFi/LAN.exe) through the internet by web browser. Please check "Download Tool"Page78 for more information. 2. Find the wireless local area network manager from computer that you broadcast of the SSID (for example: the name of SSID is “Optivtw_W_I”).
EZ Suite (EZ Display Function) Mirror mode (default): Clone or mirror desktop mode Mirror mode Extension mode: Span or extended desktop mode About: The information for EZ WiFi/LAN 39
EZ Suite (EZ Display Function) Exit: To quit the program and discontinue projecting images from the computer. Audio Streaming: On -Projecting images from the computer with audio sound. Off -Projecting images from the computer without audio sound. ►Note: The frame rate of video would be decreased while the setting of Audio Streaming is ON. button from the EZ WiFi/LAN dialog window on 1. Exit WIFI Display: Click the the computer or press the ESC button on the remote control to quit WiFi Display. 2.
(= 6XLWH (= 'LVSOD\ )XQFWLRQ EZ Display main functions: 1. View MS-Office files (Word, Excel, PowerPoint), Adobe PDF,Apple iWorks (Pages, Numbers, Keynote). Also supports Sketch function and saves to photo roll. 2. Link your Dropbox storage and view the documents stored on it. 3. Display Web pages and support sketch function as well.
EZ Suite (EZ Display Function) 4.
EZ Suite (EZ Display Function) 2.3 EZ LAN ►Note: EZ LAN Display supports MS Windows OS, Apple Mac OS Projector Ready: 1. Connects projector„s LAN port to Switch, Hub, or Local RJ45 outlet LAN port with the standard RJ45 Ethernet cable. 2. Select the EZ LAN item at EZ Display interface on the screen. It will show the Ready for display message on the screen. You can find the 4-character pass code on the screen as well.
EZ Suite (EZ Display Function) Computer Ready: 1. We need to install PC/Mac-tool (EZ WiFi/LAN.exe) program. After installed, new USB device “EZ USB” and new adapter “EZ Display” (Virtual .Graphics Card) will be installed. ►You can download the PC/Mac-tool (EZ WiFi/LAN.exe) throw the internet by web browser. Please check Page78 for more information. 2. Executing PC Tools (EZ WiFi/LAN.exe) program from PC/Notebook. 3.
EZ Suite (Setting&Configuration) 3. Setting & Configuration Version Language Update Display Ratio Repeat Mode Setting & Configuration Display Ratio Slideshow Slideshow Duration Repeat Mode AP mode Client mode Connect PC Setting 3.1 System Setting ►Note: 1. Version: Show the EZ Suite firmware version 2. Language: Show the current language 3.
EZ Suite(Setting&Configuration) 3.2 Video Setting ►Note: 1. Display ratio Original: The video aspect ratio changes in the order of original setting (according to the video image resolution). Full Screen: Change the aspect ratio to be displayed at full screen size. 2. Repeat Mode Signal: Play the selected video file once. Sequence: To play the playlist in sequence.
EZ Suite (Setting&Configuration) 3.3 Photo Setting ►Note: 1. Display ratio Original: Projected the image of original size. Full Screen: Change the aspect ratio to be displayed at full screen size. 2. SlideShow OFF: Turns SlideShow function off. ON: Turns SlideShow function on. 3. SlideShow Duration: Set the Photo Slideshow duration time as 10 seconds, 30 seconds or 1 minutes. 3.4 Audio Setting ►Note: Repeat mode Signal: Play the selected audio file once. Sequence: To play the playlist in sequence.
EZ Suite (Setting&Configuration) 3.5 WiFi Setting Please plug in the WIFI USB Dongle first; otherwise the projector would examine and project “No device” message on the screen. AP mode and Client mode are at the WiFi setting.
EZ Suite (Setting&Configuration) AP mode (Ad Hoc): Select the button, then press the ENTER button on the remote control to go to set some parameters for being enabled under AP mode. ►These settings are only for basic wireless parameters. If you are going to modify these wireless parameters, the visual keyboard will pop-up on the screen. Press the , , or buttons to select a character on the visual keyboard, and press the ENTER button to key in the character.
EZ Suite (Setting&Configuration) SSID (Service Set Identification): The same name of SSID must be assigned to wireless devices in your network. Considering your wireless network security, the default SSID is set to be “rtwap”. Security: you can configure the security settings of your wireless network. There are three wireless security modes supported by the Router: Open, WPA2 and WPA. Open – it means no security settings of this wireless network.
EZ Suite (Setting&Configuration) Client mode: When wireless clients survey the local area for wireless networks to associate with, they will detect the SSID broadcast by the Router. The SSID of the AP your Router is going to connect to as a client. Select the mode. button and press ENTER button on the remote control for starting Client Press the button on the remote control to go to the items in SSID.
EZ Suite (Setting&Configuration) Press the to connect to as a client.
EZ Suite(Setting&Configuration) Connect successfully. Select , then press the ENTER button on the remote control to detect the SSID broadcast with the router again.
EZ Suite(Setting&Configuration) EZ Display: Main functions: - View MS-Office files (Word, Excel, PowerPoint), Adobe PDF, Apple iWorks (Pages, Numbers, Keynote). It also supports Sketch function and saves to photo roll. - View local photo gallery and do sketch - Display Web pages and support sketch function as well - Link your Dropbox storage and view the documents stored on it. 1. Open App store to download the app which is EZ display. 2.
EZ Suite(Setting&Configuration) Client mode: Set the client mode parameters at \..\settings\WiFi\Client mode\. See „WiFi settings‟ (Page 52) for more information to set parameters. Connects through a wireless LAN router.. ►Note: Compatible Devices: Application Compatible Devices EZ display - iPhone 4 and iPhone 4S - iPad 2, and New iPad (gen 3 iPad) 55 Compatible OS version iOS 5.1.
E= 6XLWH 6HWWLQJ Configuration) 3.6 Connect PC Setting Connect PC for accessing internal memory. 1. Connect the computer's USB port to the projector's USB (mini-USB) port via the USB cable. 2. Computer‟s system will examines newly discovered removable media and devices. 3. Projector will display the connecting message on the screen. 4. Click and execute "Open folder to view files", it can access the internal memory from the projector. ● Remove connecting Internal Memory.
Menu Operation How To Operate On-Screen Display 1. Press "Menu" button. It will be shown blue main menu. The first main menu is " PICTURE" menu. 2. Choose which item you want to enter, you could press up / down /left/ right button of control panel or remote control to adjust item or value.
MENU (PC Mode) Picture Menu Step: 1. Use the ▲ /▼ buttons to select an item. 007 2. Use the ◄ / ► cursor buttons to select an item or adjust the value. Item Selection Description BRIGHTNESS 000/100 Adjusts the image brightness level. CONTRAST 000/100 Adjusts the image contrast level. SHARPNESS 000/015 Adjusts the image sharpness. NATURAL Natural color. CINEMA DAYLIGHT DISPLAY MODE GREEN BOARD WHITE BOARD BLACK BOARD USER Enhances contrast ratio when displaying DVD contents.
MENU (PC Mode) Audio Menu Step: 1. Use the ▲ /▼ buttons to select an item. 2. Use the ◄ / ► buttons to select an item or adjust the value. Item VOLUME MUTE Selection Description 00/40 Adjusts the volume. OFF/ON Mutes the volume OFF / ON.
MENU (PC Mode) Setting Menu Step: 1. Use the ▲ /▼buttons to select an item. 2. Use the ◄ / ► buttons to select an item or adjust the value. Item Selection Description H POSITION 000/100 Moves the image position horizontally. This function is only selected for computer signal. V POSITION 000/100 Moves the image position vertically. This function is only selected for computer signal. PHASE 000/100 Adjusts the image sharpness. FREQUENCY 000/200 Set the horizontal scanning frequency.
MENU (Video Mode) Picture Menu Step: 1. Use the ▲ /▼ buttons to select an item. 007 2. Use the ◄ / ► cursor buttons to select an item or adjust the value. Item Selection Description BRIGHTNESS 000/100 Adjusts the image brightness level. CONTRAST 000/100 Adjusts the image contrast level. SHARPNESS 000/015 Adjusts the image sharpness. COLOR 000/100 TINT 000/100 NATURAL CINEMA DAYLIGHT DISPLAY MODE GREEN BOARD WHITE BOARD BLACK BOARD USER Adjusts the strength of whole color.
MENU (Video Mode) Audio Menu Step: 1. Use the ▲ /▼ buttons to select an item. 2. Use the ◄ / ► buttons to select an item or adjust the value. Item VOLUME MUTE Selection Description 00/40 Adjusts the volume. OFF/ON Mutes the volume OFF / ON.
MENU (Video Mode) Setting Menu Step: 1. Use the ▲ /▼buttons to select an item. 2. Use the ◄ / ► buttons to select an item or adjust the value. Item Selection AUTO KEYSTONE OFF/ON Description Automatically corrects keystone distortion in image. V KEYSTONE -70/+70 Corrects vertical keystone distortion in image manually. AUTO SEARCH OFF/ON Searches for signal source manually or automatically.
MENU Advanced Menu Step: 1. Use the ▲ /▼buttons to select an item. 2. Use the ◄ / ► buttons to select an item or adjust the value. Item ZOOM / PAN Selection Description EXECUTE Execute digital zoom and pan function. FREEZE OFF/ON Freeze the current image on the screen. BLANK OFF/ON Hide the image, display a black screen. BLANK POWER 15/30/60 OFF Minute RESET EXECUTE RESIZE Set power off time after blank. Reset all menu function to their factory default values.
MENU Select the input source item, it will show the sub-items on the screen. Use the ▲ / ▼ buttons to change input source item. And use ►button to select input source SELECT SOURCE EXECUTE . RGB2 I/O could be turned into one of analog RGB IN 2 input source or output the projected from MONITOR OUT to an external monitor by RGB 1 source. LOGO SETTING EXECUTE Customize the start-up logo. IMPORTANT: To implement Logo setting function, please enter PIN code first.
MENU Advanced Menu LOGO SETTING This function allows you to customize the start-up logo. IMPORTANT: To implement Logo setting function, please enter PIN code first. Without inputting the PIN code, you cannot modify Logo setting function. Item Selection Description Select Mode( ► cursor button) LOGO MODE DEFAULT USER OFF The factory logo. The image you captured. The blank image. You can select color with background function. LOGO CAPTURE EXECUTE Start to capture the image.
MENU Advanced Menu Logo Capture How to use this function? Select Logo Capture item in the logo setting menu, and press ► button. You can see the red frame to select captured area. Image Use 4 direction buttons to adjust the position of the frame. Press “MENU” to start capturing and display a dialog. Logo Capture In Progress. ►NOTE To capture an image is available only in computer mode. The area that can be captured is 512 x 384 pixels.
MENU Presentation Menu Step: 1. Use the ▲ /▼buttons to select an item. 2. Use the ◄ / ► buttons to select an item or adjust the value. Item Selection Description AUTO CEILING OFF / ON Automatically invert the image when the projector is turned upside down, i.e. when the projector is mounted on the ceiling. FRONT EXECUTE Normal projection mode. CEILING EXECUTE Mirror the image vertically, only for the projector mounted upside down.
MENU Presentation Menu Reset Lamp Timer The lamp timer is the time counted after the last resetting. The usage time of the lamp is shown in the PRESENTATION Menu. Pressing the RESET button or the ► button displays a dialog. To reset the lamp time, select the RESET using the ► button. ►NOTE The replacement warning message is set to appear after about 2000 hours of lamp use in order to maintain the initial brightness.
MENU Security Menu Step: 1. Use the ▲ /▼buttons to select an item. 2. Use the ◄ / ► buttons to select an item or adjust the value. Item PIN LOCK PROTECTION Selection OFF ON 1 ON 2 Description OFF: Turn off PIN lock protection. ON 1: After plugging in AC power, you need to key in PIN code at the first time of use. If the AC power stays plugged, you do not need to key in PIN code next time when you use the projector. ON 2: You need to key in PIN code every time when you turn on the projector.
MENU Security Menu Step: 1.Use the ▲ /▼buttons to select an item. 2.Use the ◄ / ► buttons to select an item or adjust the value. Item FILTER TIMER RESET FILTER TIMER Selection Description Show the filter use hour. EXECUTE Reset the filter timer after cleaning / changing filter. 500 hours FILTER COUNTER 800 hours 1000 hours Select (500 / 800 / 1000 hours) depending on the environment (default : 500 hours). Please see as below. MAC ADDR. If purchasing LAN control module, "MAC ADDR.
MENU Security Menu Step: 1.Use the ▲ /▼buttons to select an item. 2.Use the ◄ / ► buttons to select an item or adjust the value. Item Selection PROJECTOR NAME Default is Projector DHCP OFF / ON IP Description Projector network setting display which shows bits that can be recognized by ASCII. When setting ON, projector's IP address will be assigned by DHCP server automatically. When setting OFF, you can use remote control to do setting manually. Key in IP address manually.
MENU Auto Filter Alert Auto Filter Alert is in the SECURITY category and shows the air filter use time and alerts user to change the filter. Pressing ► cursor button will display a dialog. When the operating time reaches the set time, a warning message will appear on the screen to remind user of filter cleaning / replacing. Filter Replace... Filter has been used for more than 500 hours. ►NOTE Please reset the Filter time only when you replace the filter.
MENU PIN Key In Operation When the projector is turned on and the PIN LOCK PROTECTION is set to [ON], the image will show as on the right side. 1. P ress the MENU button on the projector or remote control. Enter PIN code by keypad or remote control. 2. How to enter a PIN code? You can use control panel or remote control. CONTROL PANEL REMOTE CONTROL The control panel and remote control buttons to enter a sequence of PIN code is like the photo below.
Network Control Software Application LAN Procedure to utilize this function It can help user to monitor and manage the projector(s) status in the local area network. Register the projector(s) which needs to be controlled. "Auto search" can help you to seek the projector(s) source easily. After registering in the work group, you can start to control the projector. Group the projector(s) into different sections. You can monitor the status easily by the sort of group name function in the network.
Network Control Software Application Browser Control Auto IP address setting (while DHCP setting is "ON"): (1) Enable DHCP from the projector on-screen-display menu, under "SECURITY \ LAN SETTING". (2) Wait for the PC server to release IP address to the projector. (3) Enter "Given IP address (For example http://192.168.1.176/)" into the address bar of the web browser and press “Enter” key or click “Go” button.
Network Control Software Application ADMINISTRATOR MODE User name: admin Password: (Default password setting is disabled.) Home (Status): Show current projector status and network configuration settings.
Network Control Software Application ITEM ITEM SETTING DESCRIPTION Status Projector Name System Status Show projector name. Show if projector is Power On or Inactive . Input Source Show current input source. Lamp Hours Filter Hours Show lamp used hours on current projector. Show filter used hours on current projector. IP Address Show current IP address of wired LAN. Subnet Mask Show current Subnet Mask of wired LAN. Gateway MAC Address Show current Gateway of wired LAN.
Network Control Software Application ITEM SETTING Basic Projector Name Power Input Source Picture Brightness Contrast Sharpness Color Tint Display Mode Audio Volume Mute Setting Keystone Auto Sync Auto Search Advanced Blank Blank Power Off Freeze Resize Reset All Presentation Projection Lamp Mode DESCRIPTION Show projector name on the current projector. Power On or Power Off the projector via network. Select input source. Adjust the image brightness level. Adjust the image contrast level.
Network Control Software Application Network : Set up network configuration and password from this page. ITEM SETTING Network DESCRIPTION DHCP IP Address Subnet Mask Assign an IP address to the projector from the DHCP server automatically. Set up IP Address when DHCP is disabled. Set up Subnet Mask when DHCP is disabled. Gateway Set up Gateway when DHCP is disabled. DNS Server Group Name Set up DNS Server address when DHCP is disabled. Create projector group (Max length: 14 characters).
Network Control Software Application Alert: Show and setup Alert configurations. When problem occurs to the projector, it will automatically send e-mail to remind user. How to operate: 1. Enter Email Setting columns. 2. Enter SMTP Setting columns. 3. Select Alert Condition. Multiple choices are fine. 4. Press Submit to confirm. 5. After completing Alert Setting for the first time, it is recommended that you press Issue Test Mail to see if the attendees can receive the e-mail.
Network Control Software Application Schedule : Show and set up Schedule, including Weekly Schedule and Specific Day. Weekly Schedule To power on and power off projector based on Weekly Schedule. How to set up: 1. Choose week days. 2. Set up power-on or power-off time. (Be sure that the interval between power-on and off setting is more than 5 minutes.) 3. Enter Input Source and select input source. 4. After completing setting, press ADD to confirm. 5.
NeeftowreorUkseControl Software Application B Time : 1. Current System Time Setting: Refresh the date/time on the webpage if you click “Refresh” button. 2. System Time Setting : To set the date/time manually Enter the Date in Month/Day/Year format. Enter the Time in Hour/Minute/Second format. 3. Click the “Submit” button to save your setting. Creston: Projector's detailed setting from Creston.
N B etowro e rUkseControl Software Application ITEM SETTING DESCRIPTION Power Vol + (Volume +) Power On or Power Off the projector via network. Adjust the volume up. Vol + (Volume -) Adjust the volume down. Mute Source List Mute the volume OFF / ON. Select input source. RGB1 RGB2 HDMI/DVI VIDEO S-VIDEO USB Brightness Adjust the image brightness level. Contrast Adjust the image contrast level. Color Adjust the strength of whole color.
NeeftowreorUkseControl Software Application B 1. Click button to leave this page. 2. Creston Control Projector Name: Displays the projector name used to identify the projector when connected to a network. When editing, you can enter up to 14 single-byte alphanumeric characters. Location: Show the location where the projector is. When editing, you can enter up to 14 singlebyte alphanumeric characters.
N B etowro e rUkseControl Software Application About the “Info” button: Show current projector status from this page. Press exit button to leave this page. Click button to leave this page. About the “Contact IT Help”: Click to close Contact IT Help window dialog. Click to send the message to Creston‟s device and projector. Logout: logging out of the projector network control.
Maintenance of Projector Air Filter When a warning message appears to remind you to clean the air filter, replace a new one as soon as possible. Check and clean the air filter periodically. Replacing the Air Filter When the use time reaches the filter counter time, the projector will display a message that indicates to replace a new filter. If there is no spare air filter available, contact your dealer. Up New one Turn off the projector, and unplug the power cord.
Maintenance of Projector Lamp 1. If you want to replace new lamp, but the projector was just turned off, please let the projector cool down and unplug power cord at least 60 minutes. 2. If the projector is mounted in the ceiling, contact your dealer to replace the lamp. Replacing New Lamp 1. Remove the lamp door. 2. Loosen 2 screws of the lamp holder. Take the handle on the top of the lamp, pull out the lamp straight off the projector. 3. Insert new lamp, lock the lamp door firmly with 2 screws. 4.
Maintenance of Projector WARNING The projector uses a high-pressure mercury lamp. The explosion of lamp with a loud bang or burn out could possibly cause injury or a fire. When the bulb bursts, it is possible for shards of glass to fly into the lamp housing and for gas containing mercury to escape from the projector‟s vent holes. If the lamp has broken, do not check the inside of the projector. Ventilate the room immediately.
Maintenance of Projector Other Care Cleaning The Lens If the lens is dirty and dusty, display quality may be decreased. Before cleaning the lens, make sure that the projector has cooled down adequately. After the projector has cooled down adequately, lightly wipe the lens with the available lens-cleaning cloth. Do not touch the lens directly with your hand. Additional -In order to ensure the safe use of your projector, please contact your dealer to inspect about once a year.
Troubleshooting Indicator The power and lamp indicators show the status of the projector. Before requesting repair, check the projector status using the chart below. If the problem cannot be resolved, contact your dealer. In normal status~~~ POWER Blinking In Green Lighting In Green LAMP CONDITIONS DESCRIPTION Off Stand by mode Projector is ready to be turned on. Off On mode Projector is on and operating.
Troubleshooting Error For Machine Defects The following problems may be confused with a machine defect. Check and follow the table. If it couldn‟t be improved, contact your dealer. Symptom Projector power does not turn on. No image Colors are pale Abnormal brightness & contrast Image is blurred Cause / Remedy The power cord is disconnected. Plug the power cord into an AC outlet. Intending to turn on the projector again during the cool down mode. Wait until the cool down mode has completed.
Troubleshooting Error For Machine Defects Symptom No audio Remote control is not working. Cause / Remedy The projector is not connected correctly. Check if audio cable is connected correctly. The volume is set to minimum. Adjust the volume. Mute is turned on. Press the MUTE button. No battery. Before using the remote control, check the battery of remote control. Remote signal is obstructed. Remove the obstacle between projector and remote control.
Troubleshooting List of Supported Monitor Displays Computer mode Signal Refresh Rate (Hz) Resolution (pixels) VGA 60 640x480 VESA 60/72/75/85 640x480 SVGA 56/60/72/75/85 800x600 XGA 60/70/75/85 1024x768 SXGA 70/75 1152x864 SXGA 60/75 1280x960 SXGA 60 1280x1024 WXGA 60/75 1280x800 WXGA+ 60/75/85 1440x900 SXGA + 60/75 1400x1050 UXGA 60 1600x1200 WSXGA+ 60 1680x1050 MAC 67 1280x1024/640x480 MAC 75 832x624 MAC 75 1024x768 MAC 75 1152x870 Signal Refresh Rate (H
Appendix Menu Tree (PC Mode) Brightness PICTURE Contrast Sharpness Display Mode AUDIO Volume Mute Natural Cinema Daylight Green Board White Board Black Board User Auto Ceiling H Position V Position PRESENTATION Phase SETTING Lamp Mode Frequency Lamp Auto Keystone Reset Lamp Timer V Keystone Front Ceiling Rear Ceiling And Rear Power Managment Auto Sync PIN Lock Protection Auto Search Off On 1 On 2 Modify PIN Filter Timer SECURITY Zoom / Pan Reset Filter Timer Freeze Filter Counter Blank
Appendix Menu Tree (Video Mode) Brightness PICTURE Contrast Auto Ceiling Sharpness PRESENTATION Color AUDIO Volume Mute Natural Cinema Daylight Green Board White Board Black Board User Reset Lamp Timer Power Managment PIN Lock Protection Off On 1 On 2 Modify PIN SECURITY SETTING Lamp Mode Lamp Tint Display Mode Front Ceiling Rear Ceiling And Rear Filter Timer Auto Keystone Reset Filter Timer V Keystone Filter Counter Auto Search 500 hours 800 hours 1000 hours MAC ADDR.
Appendix Appearance 97
