User's Manual

26
For more details about LED indicator, please refer to
as following:
Status Receiver Transmitter
Flashes continually
every 1 second.
Flashes in blue
Low power
Flashes quickly in blue lightThe transmitter and the receiver waits for pairing
Off
Flashes in red
/
Flashes in blueOff
Flashes continually
every 2.5 seconds.
The transmitter and the receiver connects.
The transmitter and the receiver disconnects.
Receiver unit is turned OFF(Transmitter is still ON)
Transmitter unit is turned OFF(Receiver is still ON)
Flashes continually
every 1 second.
Stays blue
2. Power LED
Press these buttons to set the attenuation level
of the input signal.
For more details, please see “Connecting the
transmitter and the receiver” on page 26.
6. M/S Switch
5. Pair Bottom
7. Built-In Internal Antenna
3. USB Type-C Connector
4. Volume +/-