User's Manual

How to connect transmitter and receiver?
15
If transmitters and receiver disconnect, please follow
below steps:
Otherwise, the light for receiver and transmitters will
flash continually every 1 second, then try 1-4 steps
again.
Before leaving factory, the connection of transmitters
and receiver will be established.
1. Turn on the receiver and the transmitters.
2. Press the button “+” and “-“ for 3 seconds for
receiver and press "Pair" of one transmitter for 3
seconds at the same time.
3. When transmitter and receiver connects, the light
of receiver will stay blue, the light of transmitters
will flash every 2.5 seconds.
4. Repeat step 2 for the other transmitter.