Use and Care Manual

Step 1.Removing parts

Velcro will be located beneath the sofa and chaise, gently open the Velcro and take out the back cushions and pillows underneath.

There will also be some parts inside the storage ottoman.

Step 2.Assembling legs and the arm on the sofa

Assemble the arm (A) onto the sofa (B) by aligning the holes from the arm to the sofa and use the bolt and washer (total 4) to tighten

them. Once the 4 bolts are tightened you may close back the Velcro. Attach the legs by twisting on the legs onto the four corners of

the sofa by locating the holes and aligning them.

Step 3.Assembling the legs onto the chaise and ottoman

Assemble the legs onto the chaise of the sectional by having it tilted it on the side and align the legs to the holes in the four corners

and twist on the legs onto the chaise and ottoman

Step 4.Putting together the sofa and chaise

Align the hinges on the side of the sofa and chaise and lift up the side where the hinges go down, making them slot together.