INSTRUCTION MANUAL WWW.BNK-GLOBAL.COM INFO@BNK-GLOBAL.
IMPORTANT Thanks for choosing BNK . For your SAFETY, please read this manual before using the product. Thanks. 001/002 I.WALL-HUNG TOILET 003 II.INSTALLATION GUIDE 005 III.CHART OF TOILET INSTRUCTION 007 IV.ONE-PIECE DUAL FLUSH TOILET 009 V.SEAT INSTALLATION 011 VI.
WALL-HUNG TOILET 1.Fully insert straight tube into cistern flushing outlet and connecting pipe into discharging outlet. 2.Draw the lines as above picture 5.As per drawing, L1 is distance between the two lines on straight tube.L2 is distance between the two lines on connecting pipe 9.Five accessories: part A.B.C.D.E 6.Cut the straight tube and connecting pipe as per above drawing. 10.Fix the part B into the screw as the above picture 13.Fix part into the hole on part C by tool part A . 003/004 3.
INSTALLATION GUIDE INSTALLATION GUIDE 2- Voici la liste des outils qui seront nécessaire à l’installation: perceuse,marteau, tournevis, colle pour le verre, règle triangulaire ... 1- Size of seven-type mounting brackets, floor screws (70mm, φ6mm), plastic sleeves (60mm, φ 8mm) and toilet bowl mounting screws (90mm, φ 4mm). 2- The tools required for installation are: Drill, hammer ,screwdriver, glue for glass, Triangular rule ... 7- Ajustez les équerres d’installation et serrez les vis.
CHART OF TOILET INSTRUCTION CHART OF TOILET INSTRUCTION WALL WALL Make sure the position of the holes by following the Step 1 and Step 2. Place the seven-type brackets following Step 3. Make sure the position of the holes by following the Step 1 and Step 2. Place the seven-type brackets following Step 3.
ONE-PIECE DUAL FLUSH TOILET INSTALLATION INSTRUCTIONS CARE AND MAINTENANCE To ensure this product is installed properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure your installation conforms to local codes. CAUTION: HANDLE WITH CARE. VITREOUS CHINAWARE FRAGILE WITH SHARP EDGES IF BROKEN. NOTE: Pictures may not exactly define contour of china and components.
SEAT INSTALLATION Remove the seat and cover from it’s box. Insert the top fixing rawl plugs into the seat bolt holes. Place the hinge blocks, without the stainless steel covers, over the rawl plugs and loosely fix the screw though the hinge blocks into the rawl plugs(step 1 and step 2). Fit the seat and cover onto the hinge blocks by locating the fixing holes onto the hinge pins and push into place. Close the seat and cover onto the pan, and adjust the position in line with the rim of pan.
