Installation Guide

Table Of Contents
Pressure balanced diverter valve
Valve
Face plate with sealjoint
Diverter knob kit
Trim cap
Allen screw
Handheld Shower Kit with Flexible Hose
Flexible hose
Hand shower holder
Hand shower
Shower head
Shower arm and flange kit
Bathtub spout waterfall
CARE INSTRUCTIONS
DO NOT:
SHOWER SYSTEM FAUCET
Installation instruction
A3807
CH/BN/MB/BG/ORB
A
A-1
B
C
A-2
A-3
A-4
A-5
B-1
B-2
B-3
No.
Description
D
B1
B2
B3
A1
A2
A3
A3
A4
A5
A5
A4
* Apply plumber's
putty under the plastic
cover deck plcta to seal
your installation.
*The model shown in
the installation steps
may differ from the one
in box however
connection type and
installation steps are
the same.
Firmly hand tighten the hose
to the valve and add a quarter
turn using the proper wrench
Tighten more if needed
CONNECTION ADVICE
A
B
Website:www.boyellivng.com
Customer Service: 323-982-8955
Email: service@boyelliving.com
1. When you open the product packaging, please check the product and accessories at first.
If there are any discrepancies, please contact us promptly. We will provide you with a
satisfactory solution.
2. The hot and cold water supply pipe of the valve must be properly connected. When facing the
front of the valve, the hot water supply is on the left and cold water supply is on the right.
Incorrect connection will cause permanent damage to the cartridge.
3. If the accessories to be changed without affecting the use, we will not make a prior notice.
4. The impurities in the water supply pipe must be cleared before installation to avoid blockage.
5. The water pressure of the faucet is 0.05MPa-1.0MPa(including cold water and hot water
Pressure). Applicable water temperature range:39°F-194°F.
Plumber's
putty
Thread seal
tape
Included
2PREPARATION BEFORE INSTALLATION
1INSTALLATION PRECAUTIONS
3 CONCEALED FAUCET ACCESSORIES LIST
4TECHNICAL DRAWING OF DRILING SIZE
Wall
2.2"
1.8-2"
C
HEAD SHOWER
COLD WATERHOT WATER
D
1. The size of the valve that needs to be drilled is 5.3" x 6.7".
2. The depth of the valve is 1.8"-2.2". It's better to drill the depth of 1.8" for blank wall.
E
E
BATHTUB SPOUT
HAND SHOWER
5.3"
6.7"
2.68"2.8"

Summary of content (2 pages)