Installation Guide

3
/ 8
TOOLS
Safety glasses / maker / silicone adhesive sealant / tape measure / Jigsaw / rags / wood braces / level / screws /
bladed screwdriver
Step 1 : Position Template
Check the cut-out template against the actual sink to ensure a proper sized cut-out， then
Place the cut-out template in the desired location on the countertop
Step 2 : Trace Template
Trace template on countertop with a pencil (Figure 1)
Cut the opening in the countertop by carefully following the traced line (Note: Please
Step 3 : Cut Countertop
use the appropriate saw that fits your coutertop material)