Installation Guide

6
/
8
MAINTENANCE INSTRUCTIONS
FAQs
1. Why is there rust in my new kitchen sink?
Reasons:
1.1 The rust may be caused by the welding cement, or oil residue on the sink which when not cleaned on time
can lead the sink to rust.
1.2 Chemical cleaning agent, paint, sauces or cooking oil left in the kitchen sink after a certain period of time
these will create molds and the molds would stick on the surface.
Prevention and Treatments:
1.1 Install the sink after everything else is done, and clean your sink right after installation.
1.2 Clean your sink after every use.
1.3 Properly remove the rust and molds using a scouring pad
2. What will scratch or harm the sink?
Reasons:
Improper packaging can lead to scratch marks. The accessories may scratch the sinks during transit.
Prevention and Treatments:
1.1 Minor scratch: You can use a sponge with toothpaste to polish it again and again.
1.2
Moderate scratch: Using a scouring pad to polish small areas.
1.3
Serious scratch: Purchase stainless steel polisher.
LORDEAR will try our best to pack the sinks well which would avoid the scratches. But the sink is
easily scratched by sharp objects.
3. What cause the hard water stains?
Reasons:
This is normal if you use the sink after a certain period of time.
Prevention and Treatments:
1.1. Scouring powder can easily solve the problem.
1.2. Clean Daily. Use a soft towel to wipe the sink with warm water. Mixing in some washer-fluid is advisable
Remember wipe it dry at last.