Use and Care Manual

【
【
【
【Instruction
Instruction
Instruction
Instruction for
for
for
for Remote
Remote
Remote
Remote Controller
Controller
Controller
Controller and
and
and
and Switch
Switch
Switch
Switch Panel
Panel
Panel
Panel】
】
】
】
Control Panel / Remote Control Operation
(Control panel POWER switch must be ON to use remote control.)
POWER
Turns the appliance ON/OFF.
Backlight
TIMER
Controls Flame brightness.
5 Settings
: ( L1-L2-L3-L4-L5) Flame dims from L1 to L5.
F5 is the brightest setting.
Attention:the backlight will be available for wall mounted.
Controls backlight color.
13 colors
:There are 13 colors backlight for option.
.
Controls the Timer.
9 Settings:
(1h, 2h, 3h, 4h, 5h, 6h, 7h, 8h,9h) Press button
until reach desired setting.
FLAME
HEATER
Controls the Heater.
Press button to initiate the heate
r.
(OFF) no heater or blower.
(LO), heater blows warm air (750W)
(HI), heater blows hot air (1500W)
NOTE
: Heater functions cycle from OFF-LO-HI
The control panel is located at the right side hole,you can press the buttons based on the following
functions.
WARNING : Do not move or remove the mesh trim panel, when the appliance is plugged in and
operating. This will cause the remote control and touch panel to no longer function.
Timer
Setting
Heater
Setting
Backlight
Flame
Power
On/Off
Timer Setting
Backlight
Power On/Off
Heater Setting
Flame
The touch display panel is shown by LED's on the flame screen,the LED's will appear accordingly.