Owner`s manual

EL455 Elliptical

Heart Rate Control Program operation

You must have your hands in contact with the hand pulse sensors at all times for the heart

rate program to work.

To start the HRC program follow the instructions below or just select the HRC program then the

Enter button and follow the directions in the message window.

1. Select the HRC program then press the Enter key.

2. The message window will ask you to enter your Weight. You may enter your weight using the

Up and Down keys or the numeric key pad, then press the Enter key to accept the new

number and proceed on to the next screen.

3. You are now asked to enter your Age. You may adjust the age number using the Up and Down

keys or the numeric key pad, then press enter to continue.

4. Next is Time. You may adjust the Time and press enter to continue.

5. Now you are asked to adjust the HRC percent. The default is 70%; you may select 60% or

80% also. Adjust the level and then press enter.

6. You are now asked to select the Target heart rate Level. This is the heart rate level you will

experience during the program. Adjust the level and then press enter.

7. Now you are finished editing the settings and can begin your workout by pressing the Start key.

You can also go back and modify your settings by pressing the Stop key to go back one level,

or screen.

8. If you want to increase or decrease the workload at any time during the program press the Up

or Down key. This will allow you to change your target heart rate at any time during the

program.

9. During the HRC program you will be able to scroll through the data in the message window by

pressing the adjacent Display key.

10. When the program ends the message window will show a summary of your workout. The

summary will be displayed for a short time then the console will return to the start-up display.