Instruction manual

ManualsBrandsBoynq ManualsMP3/MP4 playersSABRE BLACK

Manual sabre english

Congratulations on purchasing your new high-quality ‘Made for iPod’ stereo speaker

with integrated docking station for iPod, better known as the “Sabre™” by boynq

Besides playing your songs from your iPod through the speakers, with the new Sabre

it is also possible to play photo slideshows or movies on your television.

Contents of the box:

Sabre Speaker

6 docking inserts (1 already inserted in the Sabre)

Line-in cable (30 cm)

Line-out cable (100 cm)

S-video cable (150 cm)

Power adapter

Instruction manual

Equalizer Card

Product details:

Volume control switch, turn to adjust the volume

Treble control switch, turn to adjust the treble sound settings

On/off button with power-on indicator LED, push for switching the Sabre on/off

Bass control switch, turn to adjust the bass sound settings

iPod dock connector (male 30-pin)

docking inserts for: iPod video 30 GB / iPod nano / iPod nano 2nd generation /

iPod 10, 15, 20GB models and iPod 60, 80GB video / iPod 30, 40, 60GB models

/ iPod mini

Left integrated speaker (10W, 4 Ohm)

Right integrated speaker (10W, 4 Ohm)

Line-in connection (3,5mm), to connect auxiliary sound devices to the Sabre

Line-out connection (3,5mm), to connect the Sabre to your Home stereo

installation

Video-out connection (S-video), to connect the Sabre to your television

iPod dock connector (female 30-pin), to enable data synchronization between

the iPod and the computer

DC power jack

Audio cable (3,5 jack to 3,5 jack)

Audio cable (3,5 jack to double cinch)

S-Video cable (S-video to composite)

Made for :

iPod video 30, 60, 80GB

iPod nano 1,2, 4GB and nano 2nd generation 2,4,8GB

iPod photo

iPod mini 4,6GB

iPod with dock connector (10, 15, 20, 30, 40, 60 GB only)

Installation:

The Sabre is very easy in use. Connect the supplied power adapter to the back of the

Sabre and the appropriate power outlet. Place the docking insert, corresponding with

your iPod, in the Sabre and dock your iPod in the insert. Switch the Sabre on, a power

indicator in the on/off button will light up. The Sabre is now ready for use, just select

the desired music on your iPod and press play.

Our team of Sound Technicians have prepared a special Equalizer Card that can help

you to adjust and optimize the bass and treble settings to different styles of music.

10)

11)

12)

13)

14)

15)

16)

•

Note:

Each docking insert has an inscription on the bottom side to indicate the supported iPod model. Only use a

corresponding appropriate insert to insert your iPod. Incorrect usage of inserts could damage iPod and/or

Sabre. Some iPod models could have limitations or function differently when used with the Sabre. This is

completely normal and please refer to your iPod manual for further details.

Always use the AC adaptor supplied with the Sabre for power supply, recognized by Sabre logo on DC connector

plug. Usage of a different AC adapter on the Sabre will lead to loss of warranty and possible damage to Sabre

and iPod.

Operation:

Recharging: the iPod will recharge when docked in the Sabre on the AC adapter and

automatically when the USB or FireWire docking cable is attached to the Sabre.

Synchronization: To use the Sabre as data synchronization docking station, please

connect the original iPod USB or FireWire docking cable (30-pin dock connector) to

the Sabre and the computer. No extra software, besides iTunes and iPod software

is needed. Once the iPod is inserted into the Sabre, the computer will automatically

recognize the iPod. Please note that not all iPod models support FireWire data

communication, refer to the iPod manual for further information.

Line-in: Auxiliary sound devices such as iPod shufe/ MP3 players/ MiniDisc or CD

players, can be connected to the Sabre Line-in connector at the back of the Sabre.

Connecting an auxiliary device to the Sabre will override the sound from a connected

iPod.

Line-out: simply connect the supplied line-out cable to the line-out connection on the

Sabre and to a Line-in connection on your Home Stereo.

S-video out: To watch movies or pictures on your television screen, connect the

included S-video cable or an original S-video cable between the Sabre and your

television.

System requirements:

A computer platform with a USB 2.0 host connector port or a FW connector port

PC with operating system Windows 2000 SP4, Windows XP, Mac OS X 10.1.5

Specications:

Made for iPod stereo speaker

Docking station for recharging the iPod

Docking station for data synchronization via USB and/or FireWire cable

Enhanced 2 x 10W RMS full range drivers (3”) for optimal clarity and powerful

distortion free sound

Treble and bass control for optimal sound

Including 6 different docking inserts to t all iPod models

Stereo line-in connection for iPod shufe and auxiliary audio devices

Video-out for connection to television

Stereo Line-out for connection to home stereo

Power adaptor input 100~240V, 18V DC/ 1.33A output

Frequency range 20Hz – 20KHz

Magnetically shielded against High Frequency (mobile phone) interference

Weight: 740 gr.

Dimensions: 100x150x200mm

Please visit www.boynq.com for a more detailed manual and trouble shooter on the Sabre or other products

within the boynq collection.

iPod is a trademark of Apple Computer, Inc., registered in the US and other countries.

The “Made for iPod” logo indicates that this product has been designed specically to work with iPod. The

manufacturer certies that this accessory has been made in accordance with the high standards of quality and

performance that you expect from iPod and Apple.

•

Manual sabre english

4 5