Instruction manual

ManualsBrandsBoynq ManualsMP3/MP4 playersWAKE-UP iPod Speaker/Alarm Clock

Wake up with iPod:

On your iPod select the song, album or playlist you would like to wake up with

and press play. If you select the last number of an album or playlist, please

place the iPod in repeat mode to ensure the Alarm will keep playing music.

Put the iPod in Pause/Sleep mode (hold down play/pause button) and insert into

the WakeUp

The WakeUp

can be put to sleep by pressing the on/off button.

Please ensure the Alarm audio source is set to iPod.

To wake up with a buzzer sound, please select AUX as Audio source for the

Alarm.

Sleep:

Press SLEEP until Sleep ashes in the display and adjust the preferred sleep time by

pressing HOUR and MIN. Press Sleep to conrm the sleep timeout and sleep will be

highlighted in the display to indicate the function is activated. Press SLEEP to deactivate

the sleep function.

Good to know!

Recharging: the iPod will recharge when docked in the WakeUp

on the AC adapter

and automatically when the USB docking cable is attached to the WakeUp

Synchronization: To use the WakeUp

as data synchronization docking station,

please connect the original iPod USB docking cable (30-pin dock connector) to the

WakeUp

and the computer. No extra software, besides iTunes and iPod software is

needed. Once the iPod is inserted into the WakeUp

, the computer will automatically

recognize the iPod.

Line-in: Auxiliary sound devices such as iPod shufe/ MP3 players/ MiniDisc or CD

players, can be connected to the WakeUp

Line-in connector at the back of the

WakeUp

Line-out: simply connect the supplied line-out cable to the line-out connection on the

WakeUp

and to a Line-in connection on your Home Stereo.

Specications:

Made for iPod Stereo Speaker & Alarm clock.

FM Radio with auto scan feature and 9 Memory Presets.

Alarm clock, wake up to your favourite iPod tune, Radio or buzzer.

Remote control with Snooze button.

Docking station for recharging the iPod.

Docking station for data synchronization via USB.

Enhanced 2 x 10W RMS full range drivers (3”).

Crisp, clear, powerful and distortion free high quality Audio.

Treble and Bass EQ control for optimal sound control.

Including 6 different docking inserts to t all iPod models.

Stereo line-in connection for iPod

shufe and auxiliary audio devices (cable included).

Stereo Line-out for connection to home stereo, (cable included).

Magnetically shielded against High Frequency (mobile phone) interference.

Power adaptor input 100~240V, 18V DC/ 1.33A output.

Frequency range 20Hz – 20KHz.

Weight: 980 gr.

Dimensions: 165x145x150

* actual product specications may vary for technical reasons

•

Remote Control

The Remote Control allows you to control not only the basic functions of the WakeUp

but also gives you the freedom to remotely snooze the Alarm! The Snooze button is the is

the central control of the WakeUp

remote.

Remote control Buttons:

Snooze / play / pause / Power

Volume Up

Volume Down

Remote Control Operation:

Turn on/off the WakeUp™:

Keep the Snooze button pressed for 5sec to turn the WakeUp

on or to put the

WakeUp

to sleep.

Change volume:

Press Volume+ or Volume - to change the volume output of the WakeUp

accordingly (please note volume ranges from 00-40)

Snooze the Alarm:

When the Alarm sounds, press Snooze to activate snooze mode. During ‘snooze’ the

word alarm will blink to indicate the Alarm is still active. Press ALARM/SET to cancel

the alarm, the word Alarm will also disappear from the display. Standard Snooze

time is 9 min

iPod playback specic controls:

Snooze: will play or pause the iPod

Previous: skip to the previous track on the iPod (album or playlist). Keep pressed

to rewind within the song

Next: skip to the next track on the iPod (album or playlist). Keep pressed to fast-

forward within the song.

Radio playback:

Snooze: will mute the sound, when the sound is muted the volume indicator on

the Display LCD will ash

Previous & Next: press to cycle through the programmed Radio channels.

Aux (line-in) playback:

Snooze: will mute the sound, when the sound is muted the volume indicator on

the Display LCD will ash

Replacing the Remote battery

The Remote Control Battery is already installed. When the Remote Control stops

operating or its range seems reduced, it is time to replace the battery with a new one.

Take the battery holder from the Remote Control (located at the back)

Discard the empty battery in the appropriate manner and place a new CR2032

– 3V Lithium Battery, please ensure the polarity of the battery is correct (+ side

should be facing up)

Insert the battery holder back into the Remote Control.

•

Manual WakeUp™ english