User Manual

Ver. 4
3. Touch area
Touch the white rectangular area with a finger between two numbers softly.
The code number 1 and 2 use the same area, 3 and 4, 5 and 6, 7 and 8, 9 and 10 are
also same.
Ex) Code number: 1, 3, 5, 7 and 2, 4, 6, 8 are same.
Troubleshooting
Problem: There are no responses when I touch the pad.
Try: 1) Unplug connectors in case of malfunction, and re-connect.
(All LED’s will blink 3 times)
2) Check if the glass is tinted or not. (Tinted glass results in abnormal responses)
3) Make sure you are touching the rectangular area of the number pad center.
4) Check for any air bubbles between glass and sticker.
5) Press the main unit firmly from top to bottom 10 times.
6) To test the key response, affix the main unit to the window with tape. If you
put the main unit to the window without tape, it does not work.