User Manual

- 4 -
1. Installation
Step1. HUD installation. Assemble the base unit and the main body.
Find position on dashboard. Remove adhesive protection cover
from the bottom of the base unit and fix on the dashboard.
Step 2. Connect power
• If your car has OBD-II port, find and connect using the OBD-II
cable. OBD-II will provide vehicle speed and engine speed.
Check your vehicle manual for the OBD-II connector location.
• If your car does not have OBD-II port, use 12V adaptor to
connect. There will be no access to the vehicle speed nor the
engine speed.
Step 3. Mount the remote on the steering wheel.