◆ VTW73M 7.
User's Manual Welcome to use our 7.3 inch car rear view mirror monitor with built-in miracast Table of Contents Chapter One: Product Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 ●We reserve the final explanation right on this User's Manual. 1.1 Package. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 ●Specifications are subjected to change without notice. Sorry for any inconvenience caused! 1.2 Features . . . . . . .
Chapter One: Product Introduction 1.4 Front buttons operation 1.1 Package The packing box contains the following accessories. Please confirm: ● 7.3 inch car rear view mirror monitor with mirror link ● Wire harness ● User's manual ● Wire cover ● Remote control Please check your package box for the items listed above. Please contact the 5 6 7 distributor or the agent as soon as possible if there is any damage. 1 2 3 4 1.2 Features 1 7.3 inch ultra high brightness display screen ● 7.
8 10 8 8 Speaker 9 Connector 10 Special bracket 11 Red to ACC+ 12 Black to GND 13 Trigger line 1 14 Back car signal 15 Video input 16 Camera 17 Connector cover 18 Cable cover 9 13 12 14 11 15 16 18 17 3 4
Chapter Two: Installation and Wiring 2.2 Special bracket 2.1 How to install Remove the original mirror 1 Original car rear view mirror Remove the original rear view mirror and remain the metal based on the windscreen Different cars have different brackets. It depends on your vehicle maker and manufacturer. There are many methods to remove the original rear view mirror. However, please don’t force the mirror off the bracket.
2.3 How to wire The reversing signal is input to rear view mirror by connecting the green line. Therefore, reversing video can be displayed automatically on the wide 7.3 inch LCD monitor.
Chapter Three: Adjustable Guide Line 3.1 About guide line There are three lines---red, yellow, and green, to help drivers estimate the distance from obstacles. Those three lines are displayed on the monitor when the car is reversing. The green line is 10 feet away from the back of the car, and the yellow line is 6.5 feet away. The distant red line is 3.3 feet away from the back of the car, while the closed red line is 1.3 feet away. Please note that there is 0.
4.2.2 COLOR ADJUSTMENT Chapter Four: Menu Setting The defaulted setting is 50, ranging from 0 to 100, and only CVBS signal can work. 4.1 Remote control The menu only can be set by remote control, and kindly check its definition as below. Menu parameter increases Enter picture menu Menu parameter decreases Guide line up Guide line left Guide line right Enter guide line adjustment Guide line down 4.2.
4.2.5 START LOGO ADJUSTMENT It is defaulted as “ON”, you can set it to “OFF” manually. Chapter Five: Built-In Miracast This is a special device to project your mobile phone to rear view mirror monitor through Wi-Fi connection, and the popular standards like DLNA, Miracast and Air Play. The driver can set the navigation path on the phone before entering the car. The navigation audio and video can be displayed simultaneously on the rear view mirror as long as the Wi-Fi is connected to the rear view mirror.
5.1.2 How to connect with iPhone 1: Click the “M” button on TP button, switch the wireless mode to iOS mode. tap here “M”button tap here tap here After finishing the connection, then the phone screen is projected to the rear view mirror, you can press “CH” on TP button to choose "double mobile dual mode" or "single-screen mode". 2: Using iPhone search Wi-Fi (Wi-Fi name is displayed on the screen and shown as below), then enter the default password: 12345678.
After finishing the connection, then the phone screen is projected to the rear view mirror, you can press “CH” on TP button to choose “double mobile dual mode”or “single-screen mode”. 5.2.2 Full VIDEO1 screen display 5.2.3 Full MOBILE screen display 5.2 Channel switching Press the “CH” button on the screen to switch display among CAMERA, VIDEO1, MOBILE, VIDEO1+MOBILE, MOBILE+VIDEO1, CAMERA+MOBILE, and MOBILE+CAMERA. 5.2.
5.2.4 VIDEO1 and MOBILE display simultaneously Please note: 1. Both Reversing mode and non-reversing mode have seven states: built-in miracast, video+built-in miracast, built-in miracast+video, camera+built-in miracast, built-in miracast+camera, full video screen, and full camera screen. 2. Power on each time, the screen automatically keep the last status before the shut down. There are total eight states or styles---seven are listed as above, and off-screen state. 3.
Chapter Six: Firmware Update 1. click the “M” button on TP button, switch the wireless mode to iOS mode. 2. 1) using mobile/laptop/table search Wi-Fi (Wi-Fi name is displayed on the screen), then enter the default password: 12345678. 2) Upon the connection between mobile/laptop/table and dongle is completed, open web browser on the mobile phone/laptop/tablet and visit http:\\192.168.49.1. 3) Tap the icon to make the web browser jump to another page. 4. Dongle is able to access Internet through AP.
