User Manual

Table Of Contents

5.2.4 VIDEO1 and MOBILE display simultaneously

5.2.5 CAMERA and MOBILE display simultaneously

19 20

Please note:

1. Both Reversing mode and non-reversing mode have seven states: built-in miracast, video+built-in miracast,

built-in miracast+video, camera+built-in miracast, built-in miracast+camera, full video screen, and full camera

screen.

2. Power on each time, the screen automatically keep the last status before the shut down. There are total eight

states or styles---seven are listed as above, and off-screen state.

3. There are three modes of operation can trigger video；

1) The first grade is +12V BACKUP LIGHT: You can adjust the seven states when there is signal of triggering

reversing through touching CH button. The final state will be stored after powering off, and the final state

will be shown automatically when there is trigger BACKUP LIGHT next time;

2) The second grade is +12V VIDEO CONTROL-- Video channel triggered line, which connects the turning light

or brake light in a general way. Mirror will switch automatically to full screen mode of VIDEO when the trigger

signal appears; while it will switch automatically to previous state when the trigger signal disappears after 3

seconds, in VIDEO trigger state: the only brightness button of TP buttons can work, while button of M and CH

don't work.

4. When the camera and mobile show at the same time, guide line can't be displayed.