Owners manual

BOYTONE™ BT120 Stereo Bluetooth Speaker User Manual

Operating Instructions

Power On

When the speaker is off, press and hold the Multi-function Button(MFB) for 3 seconds,The LED indicator

will flash slowly in blue.At this time you will hear a tone that increases in volume from the speaker of the

set. The speaker will be paired with the last connected bluetooth device or mobile phone automatically

when turned on.

Power Off

When the speaker is on, press and hold the MFB for 4 seconds. The LED indicator will flash slowly in red.

At this time,you will hear a tone that decreases in volume from the speaker of the set. The speaker will

disconnect from your phone devices when turned off.

Pairing Mode

When the speaker is OFF,(And confirm the line in port without 3.5mm audio cable) press and hold MFB

for 6 seconds until the LED indicator flashes red and blue in alternating colors.

Notes:3mins pairing time,if not connect with any device,it will quit pairing mode.

Answering Calls

If a call comes in when listening to music or speaker is standing by, press the MFB to answer the

incoming call. If the music is playing, it will pause automatically during the call. After finishing your call,

the music will start playing automatically.

Reject Calls

If a call comes in when listening to music or speaker is standing by, press and hold the MFB for 2

seconds to reject the incoming call. After the call has been rejected, your music will start playing

automatically.

End Calls:To end a call, press the MFB.

Volume :To adjust the volume when talking on the phone, press the V+ or V- to adjust the volume up

or down. When you reach the max/min volume, you will hear a warning tone.

Last Number Redial:When listening to music or speaker is standing by, double click the MFB to

redial the last number. If you are listening to music, it will pause automatically during the call.

Mute: When talking on the phone, press and hold Vol+ or Vol- for 2 seconds to mute your microphone.

You will hear the caller, but the caller will not to hear you.

Note: There will be a warning tone every 3 seconds, reminding you that you are in mute mode.

Quit Mute: Hold Vol+ or Vol- for 2 seconds to exit mute mode.

PAGE 1
BOYTONE™ BT120 Stereo Bluetooth Speaker User Manual Operating Instructions Power On When the speaker is off, press and hold the Multi-function Button(MFB) for 3 seconds,The LED indicator will flash slowly in blue.At this time you will hear a tone that increases in volume from the speaker of the set. The speaker will be paired with the last connected bluetooth device or mobile phone automatically when turned on. Power Off When the speaker is on, press and hold the MFB for 4 seconds.
PAGE 2
Switching Between Your Mobile Phone and Headset When talking on the phone, double-click the MFB to switch the voice from your speaker to your mobile phone. By double clicking the MFB again, the voice will switch back to the speaker. Reconnect When the speaker and mobile phone are disconnected, press MFB, it will reconnect. Note: Some devices may have a prompt screen, that will ask you if you would like to pair your device.