BP 3125U data sheet

Quality and Safety
Module power measurements calibrated to World Radiometric Reference through
ESTI (European Solar Test Installation at Ispra, Italy)
Manufactured in ISO 9001-certified factories; conforms to European Community
Directives 89/33/EEC, 73/23/EEC, 93/68/EEC; certified to IEC 61215
Listed by Underwriter’s Laboratories for electrical and fire safety (Class C fire rating)
Approved by Factory Mutual Research in NEC Class 1, Division 2,
Groups C & D hazardous locations (U)
Qualification Test Parameters
Temperature cycling range -40°C to +85°C (-40°F to 185°F)
Humidity freeze, damp heat 85% RH
Static load front and back (e.g. wind) 2,400 pa (50psf)
Front loading (e.g. snow) 5,400 pa (113psf)
Hailstone impact 25mm Ø (1 inch) at 23 m/s (52mph)
Module Diagram
Dimensions in brackets are in inches. Un-bracketed dimensions are in millimeters. Overall tolerances ±3mm (1/8”)
Included with each module: self-tapping grounding screw, instruction sheet, and warranty document.
Note: This publication summarizes product warranty and specifications, which are subject to change without notice.
Additional information may be found on our web site: www.bpsolar.com
ESTI
4025-v4 12
/
03
BP Solar 2003
M
C
+
M
C
BP 3125 I-V Curves
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
0102030
Voltage (V)
Current (A)
t=0C
t=25C
t=50C
t=75C