Solar Module Specification Sheet

220 Watt Photovoltaic Module
BP 3220
The BP 3220 is an advanced polycrystalline 220W solar module that incorporates
antireflective coated cells and glass to generate more energy (more kWh per kWp)
in your installation.
This module has undergone the most rigorous testing to ensure reliable long term
performance and is certified to comply with the latest safety standards (IEC61730
& UL1703).
Six bypass diodes mounted on our IntegraBus
TM
circuit board and laminated in the
module provide effective protection of the solar cells from overheating when
shaded and ensure long term reliability.
All interconnections are made using lead free soldering making these modules
even friendlier with the environment.
Performance BP3220
BP 3220 scale 1:14
Rated Power 220W
Tolerance ±3%
Module efficiency
Nominal voltage
13.2%
24V
Warranty* 90% power output over 12 years
80% power output over 25 years
Free from defects in materials and workmanship for 5 years.
*Refer to BP Solar’s Warranty document for terms and conditions.
Configuration
BP 3220N Clear Universal frame, Wirehold IP67 potted junction box with
pre-installed output cables fitted with polarized connectors
(Multi-Contact III connectors).
Qualification Test Parameters
Temperature cycling range -40ºC to +85ºC for 200 cycles
Damp heat test 85ºC and 85% relative humidity for 1000h
Front & rear load test (eg: wind) 2400Pa (equivalent to 245kg/m
2
load distributed)
Front load test (eg: snow and wind) 5400Pa* (equivalent to 550kg/m
2
load distributed)
Hailstone impact test 25mm hail at 23m/s from 1m distance
Impulse voltage test 8000V waveform impulse according to high voltage
test techniques IEC 60060-1 standard.
Reverse current overload test 135% of the overcurrent protection rating for two
hours
*When mounted in accordance with BP Solar’s installation instructions
Quality and Safety
! Certified according to the extended version of the IEC 61215:2005 (Crystalline
silicon terrestrial photovoltaic modules – Design qualification and type approval)
! Certified according to IEC 61730-1 and IEC 61730-2. (Photovoltaic module safety
qualification, requirements for construction and testing.
! Listed by Underwriter’s Laboratories for electrical and fire safety (Class C fire rating).
! Module electrical measurements are calibrated to World radiometric reference via
third party international laboratories.
! Manufactured in ISO 9001 certified factories.