BP 365J PDF Spec sheet

6802.0046 BP365J Rev. B 11/07
`
High-efficiency photovoltaic module using silicon nitride multicrystalline silicon cells.
Performance
Rated power (P
max
) 65W
Nominal voltage 12V
Limited Warranty
1
25 years
Configuration
J Clear universal frame and standard J-Box
Electrical Characteristics
2
BP 365
Maximum power (P
max
)
3
65W
Voltage at Pmax (V
mp
) 17.6V
Current at Pmax (I
mp
) 3.69A
Warranted minimum P
max
60W
Short-circuit current (I
sc
) 3.99A
Open-circuit voltage (V
oc
) 22.1V
Temperature coefficient of I
sc
(0.065±0.015)%/ °C
Temperature coefficient of V
oc
-(80±10)mV/°C
Temperature coefficient of power -(0.5±0.05)%/ °C
NOCT (Air 20°C; Sun 0.8kW/m
2
; wind 1m/s) 47±2°C
Maximum series fuse rating 20A
Maximum system voltage 600V (U.S. NEC
& IEC 61215 rating)
Mechanical Characteristics
Dimensions Length: 1111mm (43.7”) Width: 502mm (19.8”) Depth: 50mm (1.97”)
Weight 7.2 kg (15.88 pounds)
Solar Cells 36 cells (114mm x 114mm) in a 4x9 matrix connected in series
Junction Box J-Version junction box with 4-terminal connection block; IP 65, accepts PG 13.5,
M20, ½ inch conduit, or cable fittings accepting 6-12mm diameter cable.
Terminals accept 2.5 to 10mm
2
(8 to 14 AWG) wire.
Diodes 9A, 45V Schottky by-pass diodes included
Construction Front: High-transmission 3mm (1/8
th
inch) tempered glass; Back: White Polyester;
Encapsulant: EVA
Frame Clear anodized aluminum alloy type 6063T6 Universal frame; Color: silver
BP 365
65 Watt Photovoltaic Module
BP Solar 2007
1. Module Warranty: 25-year limited warranty of 80% power output; 12-year limited warranty of 90% power output; 5-year limited warranty of
materials and workmanship. See your local representative for full terms of these warranties.
2. This data represents the performance of typical BP modules, and are based on measurements made in accordance with ASTM E1036
corrected to SRC (STC.)
3. During the stabilization process that occurs during the first few months of deployment, module power may decrease by approx. 1% from
typical P
max
.