Instruction manual

11
Tare
Tare is limited to a maximum of 2/3 full capacity.
Memory Specifications
The Main Logic PCB contains a rechargable lithium battery that will retain backup
PLU's and the time/date in the SRAM memory for up to one month. Other data,
including calibration data are retained in the EEPROM which requires no battery for
memory retention.
Agency Approvals
The model bPro is designed to meet the requirements of the following agencies:
OIML OIML R76 standard
EC Euro CE standard
NIST NTEP requirements for Class III weight device.
NTEP/California Electronic Cash Registers General Code
Requirements
FCC Requirements for FCC Conducted Emissions and Radiated Emissions
for a Class A device.
Electrical
The bPro requires a dedicated grounded 100/240 VAC, 50/60 HZ supply, and
draws 0.3 amps
(scale/printer versions). The AC line (including ground) must not
be shared with noise and surge generating equipment such as, electric motors,
compressors, thermostats, fluorescent lights, etc. A line conditioning device is