Instruction manual

• Put the switch power to the right position.

• Screw in 4 bolts of the power PCB.

• Plug in all the connection harness in the PCB.

• Put the cover of base then screw in 5 bolts.

• Put on platter.

• Power on scale.Hanging type:

bPro -H2

Take out switch power

• Power off and take out the power cable from electrical outlet.

• Take away platter.

• Take away the back display cover and back display kit as before.

• Screw out the 2 bolts (D3) from base and take away.

• Show the switch power.

• Pull out the harness in switch power.

• Screw out 4 bolts (E3) in the power PCB.

• Take away the switch power.

Install switch power

• Put the switch power to the right position.

• Screw in 4 bolts of the power PCB.

• Plug in all the connection harness in the PCB.

• Put the support plate then screw in 2 bolts.

• Install back display kit.

• Install whole hanging scale.

• Put on platter.

• Power on scale.