Instruction manual

85
• Power off and take out the power cable from electrical outlet.
• Take away platter.
• Screw out 2 bolts (G3) for fix the left cover.
• Take out the cover.
• Screw out 2 bolts (H3) in base.
• Take away A/D convertor kit (I3).
• Screw out 2 bolts (J3),take out the cover.
• Screw out bolt (K3) and bolt (L3) for connecting load cell.
• Screw out 2 bolts (M3).
• Take out loadcell.
Install loadcell
• Put the loadcell to right position.
• Use reverse steps to install the load cell as previous take out steps.