Operation Manual

38
// Aquaris M5.5
Complete User Manual - English
Settings
Device settings
DISPLAY
Brightness level: Adjust the brightness of the screen.
Adaptive brightness. Optimise the brightness level to the
light available.
Assertive Display: Optimises the visibility of the screen by
adapting to the light conditions.
Assertiveness: Regulates the intensity level of the Assertive
Brightness feature.
Wallpaper: Select an image or video to use as wallpaper.
You can choose between live wallpaper, system wallpaper
or photos from your Gallery or video images.
Sleep: Set the time delay before the screen automatically
switches off.
Screensaver: Enable or disable this option.
Font Size: Choose from four different font sizes.
When device is rotated: Enable or disable automatic screen rotation when turn your smartphone
sideways.
Double tap control: Enable or disable this option so you can switch the display on or off by
double tapping the screen.
Cast screen: You can use your smartphone to send an audio/video signal to a remote screen
(another smartphone, tablet, television, etc.) using the Wi-Fi network to display its screen on
both devices. The remote screen must be compatible with the Miracast/DLNA protocol. Follow
these steps to configure your Aquaris and duplicate your device´s screen:
1.
Switch on your compatible TV and enable cast screen mode (the process will vary
depending on the manufacturer).
2.
On your smartphone, go to Settings > Device > Display.
3.
Scroll down the list and select Cast screen.
4.
Select the screen that you want to send audio/video from your smartphone.
5. After a few seconds you will see your smartphone screen duplicated on the other
device in real time.
Buttons light: You can set the brightness of the buttons by enabling or disabling the backlight,
or it can also be enabled for only 8 seconds.
Show navbar: Enables you to add another navbar to be used if the buttons below the screen
are not responding.