Instruction Manual

English
User’s Manual
42
Cervantes/Cervantes Touch/
Cervantes Touch Light
ANNEXE B: Cleaning, Safety and Security
Cleaning
Before cleaning the device, switch it off and disconnect all the cables of the
system and power supply. Ensure that the screen is completely dry before re-
connecting the cables and switching it on.
Screen: to remove dust and dirt from the screen, use a soft, clean cloth
which does not leave uff. For the ngerprints and stains, use a cloth with
gentle cleaning products.
Casing: use a soft cloth, slightly dampened with a gentle cleaning solution.
Rinse the cloth with clean water,wring it well, and wash it to remove all the
detergent.
Safety and Security
To reduce the risk of electrical discharge, follow these instructions:
Never leave the casing open, and switch off the device before cleaning it.
Do not insert any object inside the four edges of the screen.
Do not spill liquids in or on the device, and clean it with a damp cloth. If the
device gets wet, do not switch it on and do not try to repair it. Pleas ask
the technical service personnel to check the reader before switching it on
again.
Use products which respect the environment, and do not handle them in
environment conditions that are extreme.
Guard against possible blows (direct or indirect) to the device because
they could cause irreparable damage to the screen and malfunctioning of
the product.
Keep the reader free of dust, sand and dirt.
ANNEXE B: Cleaning, Safety
and Security