Quick Start Guide

ENGLISH
54
GETTING STARTED
Battery
This device contains a rechargeable Li-ion battery. To charge your bq
Darwin's battery, connect the AC adapter to any standard socket and
connect the charger cord to the device charging jack.
When the battery is fully charged, the battery icon will be shown as
full. Disconnect the device cord and unplug the charger from the
socket.
You should fully charge the battery before using the bq for the
first time. The charging time is approximately 6 hours.
Power on/off
To power on the device, press the power button for a few
seconds. To power it off, press the power button until the
popup screen Device options appears. Tap on Power off and confirm
by tapping on OK.
Insert/remove the SD™ card
To install the SD™ card, insert it in the slot and press until it clicks into
place. To remove the card from the device, press on it gently until it
comes out.