Owner's Manual

Instruction Manual GAIPLOX
Assemble product by inserting t-notch on suction
base into cavity on back of phone grip and slide into
place. You will hear it snap. To ensure that your device
is fully protected, be sure all three clasps are snapped
shut after inserting phone into sleeve. Mount swivels
on a ball joint, use tightening nut to fix desired
position once adjusted. Floaty lanyard can be attached
for additional security if phone gets dropped in water.
The bright color helps locate your floating device.
Once assembled, clean surface where you intend to
place mount. Peel cover off suction cup and press
firmly while locking lever into down position .. After
repeated applications, suction cup may lose its
stickiness. Simply wash with warm water and air dry to
restore original condition.