Owner's Manual

Instruction Manual
RIPLOX
Assemble product by inserting t-notch on suction
base into cavity on back of phone grip and slide into
place. You will hear it snap. Squeeze arms to secure
phone, press gray button to release. Mount swivels on
a ball joint, use tightening nut to fix desired position
once adjusted.
Once assembled, clean surface where you intend to
place mount. Peel cover off suction cup and press
firmly while locking lever into down position. After
repeated applications, suction cup may lose its
stickiness. Simply wash with warm water and air dry to
restore original condition.
ve:anture:a
tM., brc,d(,al,t, en-