Spec Sheet

719-B-1112-A Printed in U.S.A.
■ Thermal efficiency up to 85%
■ ASME 160 psi working pressure heat
exchanger
■ ASME "H" stamp, designed and certified
for potable water use
■ Flanged bronze water connections
■ Glass-lined headers
■ External header gaskets
■ 125 psi (861 kPa) ASME rated pressure
relief valve
■ Flow switch, mounted and wired
■ Temperature/pressure gauge
■ Pump, mounted and wired
■ Multiple operating gas valve/pressure
regulators
■ Manual “A” gas valve
■ Washable intake air filter
■ Multiple, removable burner trays
■ Stainless steel burners
■ Built-in draft fan for Category I or III vent
systems
■ Air pressure switch
■ Burner site glass
■ 24V control system
■ 115/24VAC transformer
■ Ignitor access panels
■ Energy Management Monitor (EM
2
)
pump time delay
■ Manual reset high limit
■ Automatic reset high limit (500-2000 only)
■ Electronic PID staging control with LCD
and touchpad
■ PC board for electrical connections
■ External controller connections with
selector switch
■ Hot surface ignition
■ On/Off toggle switch
■ Pump time delay
■ Diagnostic lights
■ Less than 10 ppm NOx (500-2000 only)
■ Less than 30 ppm NOx (200-400 only)
■ All models can be converted to either
indoor use or outdoor use. For outdoor
use, you must order exhaust vent and air
intake vent (consult factory for part
numbers)
Standard Features
Optional Equipment
■ Copper-nickel heat exchanger
■ Normally open vent valve (500-2000 only,
see IRI Package)
■ Low water cutoff
■ Motorized gas safety valve
(500-2000, see LDS Package)
■ Double stack stand (500-2000 only)
■ Reverse Heat Exchanger - switches the
inlet and outlet to left side and pump to the
right side
■ Indoor Venting Accessories (required for
sidewall venting)
■ CSD-1 Package includes:
Size 500-2000:
Single Try Ignition, High and Low Gas
Pressure Switches, and Gas Regulator.
Excludes Low Water Cutoff.
■ IRI Package, added to the CSD-1 package
includes:
Size 500-2000:
Single Try Ignition, High and Low Gas
Pressure Switches with Manual reset,
Normally Open Vent Valve, Safety Valve
with Gas Regulator and Leak Test Valve.
Excludes Low Water Cutoff
■ LDS Package includes:
Size 500-1000:
Safety Valve with Gas Regulator, High Gas
Pressure Switch and Leak Test Valve.
Size 1250-2000:
Solenoid Safety Valve, Motorized Valve
with Proof of Closure, Leak Test Valve,
High and Low Gas Pressure Switches.
Clearances
*When vent and/or air is connected to the back, 36" (91cm) is suggested.
inch cm inch cm
Left Side 1 2.5 24 61
Right Side 1 2.5 24 61
Top 1 2.5 12 30
Back* 1 2.5 12 30
Front 1 2.5 36 91
Vent
APPLIANCE
SURFACE
REQUIRED CLEARANCE FROM
COMBUSTIBLE MATERIAL
SUGGESTED SERVICE
ACCESS CLEARANCES
Per venting supplier’s instructions
Power (HP) Current (Amps)
Model Numbers Soft Normal Hard Soft Normal Hard
BWCV0200
1
⁄3
1
⁄3
3
⁄4 2.8 2.8 7.2
BWCV0300
1
⁄3
1
⁄3
3
⁄4 2.8 2.8 7.2
BWCV0400
1
⁄3
1
⁄3
3
⁄4 2.8 2.8 7.2
BWCV0500
1
⁄3
1
⁄3
3
⁄4 2.8 2.8 7.2
BWCV0750
1
⁄3
1
⁄3
3
⁄4 2.8 2.8 7.2
BWCV1000
1
⁄3
1
⁄2
3
⁄4 2.8 5.2 7.2
BWCV1250
1
⁄3
1
⁄2
3
⁄4 2.8 5.2 7.2
BWCV1500
1
⁄3
3
⁄4
3
⁄4 2.8 7.2 7.2
BWCV1750
3
⁄4
3
⁄4
3
⁄4 7.2 7.2 7.2
BWCV2000 1 1 1 9.8 9.8 9.8
Motor Electrical Data
WATER CATEGORY
©2012, Bradford White Corporation. All rights reserved.
Ambler, PA
For U.S. and Canada field service, contact your professional installer or local Bradford White sales representative.
Sales 800-523-2931
●
Fax [phone] / Technical Support 800-334-3393
●
Fax [phone]
●
Warranty 800-531-2111
●
Fax [phone]
International: Telephone [phone]
●
Telefax 215-641-9750 / www.bradfordwhite.com
Sales / Technical Support 866-690-0961 / 905-238-0100
●
Fax [phone] / www.bradfordwhite.com