Installation / Operation Instruction Manual

The FT Series Heating Only, Boiler
Page 59
5.5 CH Set Point Change Mode
CH Set point Change Mode
Indicate Indicator
Current CH Temperature Set point
Celsius or Fahrenheit
or
If Communication state is activated
If ame is detected
Date and Time indicator
If CH pump is operating
If there currently a Demand for Central Heat (CH)
Default CH set point is 180°F (82°C)
CH set point range is 130°F ~180°F (54°C ~ 82.0°C)
To change CH Set point, press the C button. The CH Icon and current
CH Set point will ash.
Turn the E dial clockwise to increase, and counterclockwise to decrease CH set point, until
desired temperature is reached.
Press E dial to save changes and to Exit.
57page
B
C
E
A
D